It could be your air intake temperature sensor or maybe your mass air flow sensor
In a 2008 Hyundai Accent, the intake air temp sensor is built into the mass air flow that connects to the harness and engine. It is specifically located in the engine intake hose near the air filter.?æ
The air flow sensors are located on the intake tract between the air filter and the throttle body.
The air flow sensors are located on the intake tract between the air filter and the throttle body.
The air flow sensors are located on the intake tract between the air filter and the throttle body. have a picture of it
It's easy to replace. Mass air flow sensor or volume air flow sensor is located just before the air filter box. In order to change it you have to unplug it and the remove the top and bottom nut-bolts, and unclip the rubber hose. Replace the unit and put everything in the same fashion. Make sure that you check in the IBD scanner if the code is gone.
Could be a dirty cabin filter.
The MAF sensor is located in the intake duct between the air cleaner housing and the throttle body
The MAF sensor is located in the intake duct between the air cleaner housing and the throttle body.
MAF sensor is the Mass air flow sensor...with out it your engine doesnt think its getting enough air ..causing rough idle...no acceleration etc.. the average cost of the sensor is $156.00
P2191 trouble code is system too lean at high load which usually is mass air flow sensor
It does not have a mass air flow sensor.It does not have a mass air flow sensor.