Answers.com > Wiki Answers > Categories > Cars & Vehicles > Miscellaneous Vehicles > Tractors and Farm Equipment > If i switch my high switch to low it does not switch stays in high?

If i switch my high switch to low it does not switch stays in high?

Answer:

switch is faulty

<><><>

As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.

Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.

IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.

First answer by RBGrant. Last edit by RBGrant. Contributor trust: 2 [recommend contributor ]. Question popularity: 1 [recommend question].

[report abuse]

Can you answer these Tractors and Farm Equipment questions?

	How long does it take to plow a field?	Answer it!
	What where the first fair trade products?	Answer it!
	Does tractor supply company give veterans discounts?	Answer it!
	How do you start a tractor without key?	Answer it!
	How is agriculture consumer of industrial products?	Answer it!

Relevant answers:

Duties of high voltage switch?
It is used by utility linemen for isolation purposes. If a power line needs repair it is done de-energized. By isolating the damaged section with the isolation switches the rest of the utility...
What does a high pressure switch do?
a hi pressure switch will limit the pressure by stoping motion (turn off motor) (unload cyclinder) ect
Where is the dimmer switch for the high beams?
My car has a lever on the right side of the steering column that you pull toward to dim. My old car had a switch on the floor that you pressed with your foot.
What is a high limit switch on a furnace?
This is a switch designated to stop a peice of equipment before it does damage to itself or the surroundings.
How do i switch a 3 phase motor from low to high voltage?
You can't. You must supply the motor with it's required voltage. If it's a dual voltage motor, follow the wiring schematic on the motor nameplate to switch from low to high voltage.