 |
If you think you shorted a wire or blew a fuse on a 1989 Cadillac Brougham how do you test it? |
[Edit] |
Answer
Take a test light and with ignition on-make sure you have test light hooked to good ground-check each fuse and see if you have current running thru.
For a less technical method, take the manual and check which fuse is for the circuit You were messing with (e.g. horn); draw that fuse out of the fuse box and try to see through it against light. There is a silvery-colour small wire running from one connector of the fuse to the other within the colourful plastic isolator - it is easy to see with plain eye if this u-shaped wire has burned off. If You caused the fuse to blow by throwing in a spanner in the works or something and there is not fault in the circuit, then it should be simple to just replace the fuse with a new one of same type. If the fuse keeps blowing, then fix the faults in the circuit.
First answer by ID1078245310. Last edit by Taunokekale. Contributor trust: 47 [recommend contributor]. Question popularity: 49 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Cadillac > Cadillac Brougham > If you think you shorted a wire or blew a fuse on a 1989 Cadillac Brougham how do you test it?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
