0
Explosives that have a fire hazard and either a minor blast projection hazard?
Wiki User
∙ 14y ago
Explosives that have no explosive hazard are not explosives. Materials that have a fire hazard but no explosive hazard are Class 2 if they are gasses, class 3 if they are liquids, and class 4 if they are solids.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Explosives that have a fire hazard and either a minor blast or a minor projection hazard or both but no mass explosion hazard are in the DOT class 1 division?
3
What are the divisions for DOT Class 1?
Division 1.1: Explosives with a mass explosion hazard Division 1.2: Explosives with a projection hazard Division 1.3: Explosives with predominately a fire hazard Division 1.4: Explosives with no significant blast hazard Division 1.5: Very insensitive explosives; blasting agents Division 1.6: Extremely insensitive detonating substances
What type of hazard is identified on the placard?
Projection Hazard - #2(Explosives 1.2) Minor explosion hazard, no significant blast - #4(Explosives 1.4) Mass explosion hazard - #1(Explosives 1.1) Predominantly fire hazard - #3(Explosives 1.3) Extremely insensitive hazard - #6(Explosives 1.6) Burning/explosion during normal transport unlikely - #5(Explosives 1.5) ---------------------------------------------------------------------------------------------------------- Answer cordinates with number on sign. Corrosive - 8 Dangerous when wet - 4 Organic peroxid - 5.2 Flammable liquid - 3 Flammable Gases - 2
What class and division are explosives that have a fire hazard and a minor blast or minor projection hazard or both but no mass explosion hazard in?
# most people probably don't know what your talking about, # the person answering your question is one of those people, # I'm the person answering your question.
What dot class has a fire hazard and a minor blast?
Division 1.3 is predominately a fire hazard, with a minor blast hazard.
Placard with a blast and number 1 on the bottom?
Explosives
There are two major hazards associated with conventional explosives?
blast or shockwave fragmentation
What are two major hazards associated with conventional explosives?
blast or shockwave fragmentation
Which Hazard Class Division is moderate fire no blast?
1.4
Is there a way to force-open a blast door using explosives?
Yes- but not easily. Blast doors are designed to remain in place under the pressure generated in an explosion. Up to a point. When explosives generate more pressure than the door was designed to resist, the door loses. Bear in mind that SOME blast doors are disigned to protect against the detonation of a nuclear weapon.
How do you use the explosives on nabooti island?
You have to edge behind them to slide them to the right. First you have to blast the rock, then the wall. The sparking switch will set the explosives off.To use the explosives:Turn off the sparking wire from the elevator switch.Slide a barrel of explosives over to the right, and put it next to the rock.Turn the switch back on, sparking the explosive, which explodes the rock.Turn the sparking wire off, and repeat the process to blast the wall.
Why are high explosives unpredictable?
That is not an accurate statement. Commercial and military explosives are VERY predictable. A good part of my work was PREDICTING what a blast would produce. However, homemade explosives can be VERY dangerous and unpredictable, since they lack any form of quality control in their making.
