The rotor is the disc in the disc brake system.
Rear is to the back of the vehicle. Brake rotor is the rotating part of a disc brake.
A brake rotor is what your brake pads squeeze to slow your car down. The brake pads are mounted in a caliper. When you apply the brakes, the caliper pushes the brakes into the rotor, which then slows down your wheel.Hi, It is a brake rotor, and is the physical disc of a disc brake. Peace, crigbyThe brake rotor is the disk part. Should be shiny from where the brake pads have been rubbing on it.
A disc brake rotor with excessive run out is a warped rotor which causes a pulsation in the brake pedal when the brakes are applied. A certain amount of run out is acceptable.
The minimum disc brake rotor thickness specifications for the 2006 Lexus GS are:Front: 27mmRear: 16.5mm
Rear disc ? if it is rear disc brakes there is a drum brake in side of the rear rotor that is your parking brake and has an adjuster in it if you pull the rotor off.
If it's a disc brake bike, then Rotor is another name for the brake disc. If it's a BMX rotor may be another name for gyro / detangler - the thingy that lets you spin the bars on a brake-equipped bike w/o making a mess of the brake wires.
The answer and dimensions are stamped in the stock brake rotor of your vehicle.
when there is a visable rigde / lip on the edge of the disc (rotor) when there is a visable rigde / lip on the edge of the disc (rotor)
Disc brake pads push in. they pinch the rotor
Disc brake rotor? A pulsation in the brake pedal when applied. Distributor ignition rotor? The engine may not run or run poorly with misfires.
Replace rotor / cut rotor & replace brakes.
It looks like a hydraulic clamp. When hydraulic pressure is applied with the brake pedal, the caliper clamps the disc brake pads to the disc brake rotor to stop rotation.