0
Type your answer here... 150 wsp means 150 pounds working steam pressure, and 500 wog means water oil gas, there is a temperature limit on the valve, typically 200degrees Fahrenheit. The steam maximum for the valve with the 150 wsp is 150 pounds per square inch. When you ask if the valve is good for 260 psi, you need to ask if it is water, oil or gas, BUT not steam. 150 wsp is maximum 150 pounds of steam pressure.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is mean by NBin that ball valve 150 NB?
NB stands for Nominal Bore.
Is a 600 wog and 150 wsp good for 600 psi water pressure?
Technically yes, but any fluctuation above 600 may cause failure.. 600 PSI of water is A Lot of pressure I would recommend a valve with a 1200 wog and 300 wsp rating.. ask for a 300 lb ball valve at any supply house and they will know what you are talking about.. it is a much more expensive and withstands much more abuse.
What is a class 150 gate valve?
Class 150 (AKA 150#) refers to the pressure/temperature rating of the valve. That class applies to steel and alloy steel valves. Common classes are 150, 300, 600, 900, 1500, 2500, 4500. There are also interpolated ratings and special classes, which basically are intermediate ratings. For more information click the Related Link shown below.
What size pop up valve do i need for my hot water heater?
That would depend on the size and heating capacity of the water heater. You need a temperature and pressure relief valve ( not a pop valve which is pressure only) with an ASME rating at or above the input rating on the water heater. For example: a domestic, gas fired, 40 US gallon water heater might have 36,000 BTU per hour input rating. The pressure relief might be set to 125 or 150 psi, but the temperature rating would have to be at least 36,000 BTUH. A 3/4" T&P relief valve typically is rated at 100,000 btu per hour. If you are dealing with a larger unit ( a 50 or 60 gallon tank, or a cyclone ) you will have to check the rating plate to get the proper relief valve.
Is pn16 flange rating is equal to ansi 300 flange rating?
It's #150.
Where is the PCV valve on a 2002 ford f-150 located?
It Should Be Located In The Back Of The Passenger Side Valve Cover. It Is Kinda Hard To Get To. But You Should Find It There. Good Luck
What is the best mpg of the Triton engine?
The smallest Ford Triton engine is the 4.6L 2-valve V8. It provides decent power along with good fuel economy. The EPA fuel economy rating is 16mpg city and 22mpg highway. This engine can be found in the Ford F-150.
Where is modulator valve 1996 f 150?
There is no modulator valve on the outside of this transmission.
Where is the egr valve on a 92 e-150?
The EGR valve on a 92 E-150 is located on the passenger side front of the engine. The EGR valve is on a pipe just behind the alternator.
What are the pressure rating for 150 ansi flanges?
20
Where can you buy ball chairs?
You can buy ball chairs on Ebay for as low as $150. The Eero Aarnio Ball Chair -for adults that is orange on the inside is $150.
What is valve of f 150 1986 truck?
what is valve of ford truck F150 1986
