No it is not. I own the same car and have done over 3 brake jobs. All you have to do is remove the caliper bracket bolts (2) and the caliper slide bolts (2). Get the caliper out of the way by a bungie cord and your ready to remove the rotor..Oh yeah! Most people think it is connected to the hub because the rotor is rusted on to the hub pretty tight...Use a rubber mallot to tap off rotor. Hope that helps out...
Where is the brake fluid filler located on a 2004 Toyota Corolla?
How do I change the Front Brakes on a 2001 Toyota Corolla?
How do you replace the front break pads on a Toyota corolla .
The brake rotor specs for 93 Toyota corolla the outside diameter 255 mm and inside diameter is 142.2 mm.
Lift the vehicle with a jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the vehicle.
Is located on top of the brake pedal
2014 TOYOTA COROLLA
The center brake light replacement will require replacing the entire brake light assembly. Remove the wiring harness. Remove the center brake light retaining screws. Reverse the process to install the new center brake light.
It should only take about an hour to replace the brake lines on a 1995 Toyota Corolla. The exact time will depend on your experience with replacing brake lines.
Brake system has air in it.
Lift the vehicle with a car jack, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Next, put in the new brake pad, replace the brake shoe/caliper, replace the car tire, and lower the car to the ground.
When refilling brake fluid it is important to use the correct type of fluid for the car. For a 1995 Toyota Corolla the correct fluid is brake fluid dot 3 or brake fluid dot 4.