The traditional Mercury thermometer has the mercury in a narrow glass tube with the readings/markings etched into the glass so it is neither analogue nor digital. I thought it was analogue.
They are easier to read, but if the battery is low you can get a wrong read. Also, it depends on the quality of the thermometer.
no it dosent
anoulogue
It is analogue as it can have more than one value unlike digital which has two main values which are 1 or 0.
It is a simple device. A variable electronic resister, called a thermistor, is used and is on the end of the cord. The resister varies it's resistance value depending on temperature. The probe must be placed in the area (outside) where you want the temperature. There is a second one in the unit itself and will show the inside temperature.
thermometer
A thermostat is not a thermometer, it is a device that routes 24 volts to various circuits according to temperature. There were old fashioned type mercury bulb thermostats but they are very rare today, most thermostats are solid state circuit board type.
A temperature probe incorporates a thermocouple in its tip which gives a signal to a piece of electronic kit which translates the signal into a temperature figure. A thermometer is a direct reading instrument which usually incorporates a bulb containing mercury or another fluid, or it may use a bimetallic strip which bends under temperature changes. A thermometer is good for ambient measurements but not suitable for putting into small spaces or pressure vessels for example. A probe is more versatile.
It is analogue as it can have more than one value unlike digital which has two main values which are 1 or 0.
An antenna is analog it is not classified as being a digital device.
analog device
DAC - Digital to Analog ConverterADC - Analog to Digital Converter
When you convert digital signal to analog, it is called as an analog signal. The device used is called digital to analog converter.
An analog-to-digital converter is a device which converts an infinite resolution analog signal to a finite resolution digital signal.
An analog-to-digital converter is a device which converts an infinite resolution analog signal to a finite resolution digital signal.
You can use it in both analog and digital circuits but it is considered as a digital device.
There is a device called a digital to analog converter (DAC).
An analog meter is a device which represents the value of a measurement by a point or similar indicator. A digital meter indicates the measure by actual displaying the number representing the value. For example, an analog thermometer shows a temperature.
ADC analog digital converter
If you are referring to the traditional PSTN phone, the signals that it receives are analog. If you want to know about VOIP phone, it is digital in nature. However, analog can be converted to digital by using a device called ATA.