NO -------
Dishwasher salt is, however, the same as softener salt as used in water softeners for houses. You could use granular or tablet form. It's approximately one third to one quarter of the price per pound /kilo. You may be causing more harm to the pool & equipment by using other type salt. The savings from the wrong salt could result in replacing major components of the pool system. Not a good idea. Use what is recommended - there is a reason for those recommendations.
same as any other pool
Dishwasher salt specially made for washing dish and its not as same as cooking salt. Eating much dishwasher salt can make serious health hazard.
I answer this question as a kidney transplant patient myself. Swimming in salt water itself poses no risk to a kidney transplant patient. The phrase 'a salt water pool' may mean a swimming pool which uses salt to generate chlorine. This is not the same as swimming in salt water. A pool which uses salt to generate chlorine should not be dangerous, though it will be a somewhat weaker form of chlorine. If at all in doubt, ask your doctor.
Same as Chlorinated pools: 80-120 ppm. A salt pool is the same as a non- salt pool. Only difference is the chlorine is made in the system thru automation/mechanically. With the addition of swimming pool salt to the water it in turn goes thru the device and returns to the pool as chlorine. Otherwise you add the chlorine manually. k
At the same depth the pressure is greater at sea because salt water is denser than fresh water.
No they aren't
same as the bottom
Yes they are all the same.
If you have purchased Saline System equipment, you add regular 'salt' to the pool water. The salt (sodium chloride) is pure evaporated ocean salt - the same as you would use at the dinner table. Use 'rock' salt, but make sure it is sodium chloride and not potassium chloride (which is sold for some types of water softeners). Minimum salinty varies with the brand of saline system equipment, but is usually in the 3000-4000ppm range. 3000ppm is the same as 0.3%, by weight. Multply gallons x 8.33 to get weight of water in pounds, then x 0.003 to get pounds of salt.
Yes, one hour per 10 degrees of pool water is usually accurate, in a residential swimming pool. If you have that heater running at 85, run your equipment at least 8.5 hours. Heavy bather loads can require much more. Salt water swimming pools need the same, ad the salt generator needs to be producing proper amounts of chlorine for the application.
The same as a non-salt system pool. Disregard answer above. The only reading that will remain constant, in the above situation, is the alkalinity =80 - 120 ppm; pH = 7.4 - 7.6 For a salt system pool your conditioner/stabilizer should be slightly higher than a namually fed pool. You should achieve readings of 75 - 85 ppm.
A salt water swimming pool is a pool that has had salt added to it in order to be able to use the salt in water that is circulated through the filtration system and run it through a chlorinator. This is a set of elements that electronically create chlorine gas that is almost instantly dissolved into the water to sanitise it. The concentration of salt in the water is about 1/8 that of sea water or about the same as that in tears.