The power steering pump has nothing to do with the motore being single-overhead cam or dual-over head cam. Look and see if it says on the rocker-cover SOHC or DOHC single or dual.
The power steering dipstick is found inside of the cap of the powersteering resivour. This is not found on top of the actual power steering pump. Follow the hoses going in and out of the pump to the...
First you want to remove the belt that comes off the crank shaft. You do that be loosing the two bolts behind the pump that are attached to a bracket off the motor. Next disconnect the two hoses...
If the belt is tight and turning the pulley on the pump when the engine runs and is full, you have either got a restiction going to the rack and pinion, a faulty pump, or a bad rack. One other...
Disconnect both hoses and clamp them off. Remove the 2 bolts in the mounting bracket and loosen the bolt that mounts the bracket to the engine so you can slide the bracket out. Remove the belt by...