Good luck with that.
No, not really.
Just had my turn signal switch replaced, for the second time, on my '98 Chevy Lumina. I paid $260 to a fairly trustworthy auto repair mechanic
replace the combination switch on the turn signal stalk
The turn signal switch has a cancel tab molded on it, when this tab is broken off the switch stops canceling the signal. To repair it it will require the turn signal switch be replaced.
My turn signal switch died on my 92 Grand Prix. Rather than attempting the repair, I took it to a shop. The steering column had to be removed to get to the switch.
must replace whole turn signal switch.
A turn signal that doesn't shut off when you straighten your wheel means the trigger inside is probably broken. To repair it you will probably need to replace your turn signal switch
You do not have to reset the computer after this repair. If the Check Engine Light is on it is not because you made this repair. If you disconnected the battery the computer will reset itself.
The turn signal switch is part of the multifunction switch.The turn signal switch is part of the multifunction switch.
The turn signal switch is part of the multifunction switch.The turn signal switch is part of the multifunction switch.
Replace the multi-function switch (aka, signal light switch) with a new one. Trying to repair the broken one is not practical.
The turn signal switch is on the left.The turn signal switch is on the left.
The signal light switch, on your Toyota Camry, can be changed by unplugging the signal relay switch. Plug in the new relay switch.