burette, noun a graduated glass tube with a tap at one end, for delivering known volumes of a liquid, esp. in titrations. http://en.wikipedia.org/wiki/Burette
See the link below.
Rinsing the burette with distilled water helps to remove any impurities or contaminants that may be present in the burette, ensuring that the titrant being used in the titration is not contaminated. This helps to maintain the accuracy and precision of the titration results.
Rinsing the burette with distilled water helps to remove any impurities or residue that may be present inside the burette. This ensures that there are no contaminants that could affect the accuracy of the titration results.
nothing
To ensure accurate measurements when filling a burette tip in a laboratory setting, the proper technique involves slowly and carefully filling the burette tip with the liquid being measured, making sure there are no air bubbles present. This can be done by allowing the liquid to flow down the sides of the burette tip and tapping the burette gently to release any trapped air bubbles. It is important to stop filling the burette when the liquid level is at the zero mark on the burette scale to ensure precise measurements.
nothing
you can breathe it
To tighten a burette clamp, adjust the screw on the clamp to apply pressure on the burette. Turn the screw clockwise to securely hold the burette in place. Make sure the burette is held firmly but not over-tightened to avoid damaging the glassware.
Yes there are. Many millions of photos. If you google Holocaust photos you will find alot of interesting info and photos about it.
A ring clamp is used to hold a burette.
The smallest possible burette reading is 0.10 and the uncertainty of a burette's reading is half of its smallest value (0.05).
A burette is used to very accurately measure liquid volumes.