0
Firstly, Young's Modulus is a measure of the degree of stiffness of an isotropic material. It is the ratio of uniaxial stress to strain while the material behaves according to Hooke's Law. Therefore it is measured in Pascals or Newtons per Metre Squared, Imperial units are psi.
Secondly, the Young's modulus of steel varies slightly depending on the grade of steel being used from 190 GPa to 210 GPa, for basic calculations a value of 200 GPa can be assumed.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Solids liquids and gases. which ones are hard to deform?
When we talk about deformatation, we are referring to two properties, namely Elasticity and Plasticity. These properties are measured using constants known as " Moduli of Elasticity". There are 4 such moduli: Young's Modulus Axial Modulus Rigidity Modulus Bulk Modulus The larger the value of the Bulk Modulus, the harder it is to compress the material.
What newton law of motion is also known as actionreaction.?
Newton 3rd Law which states for every force action there is an equal but opposite reaction force
Derive the relation between young's modulus shear modulus and bulk modulus?
Type your from the hook's law, stress is directly proportional to the strain under the elastic limits. σ α ε where, σ - tensile stress. ε - strain. now σ =E ε where, E is the proportionality constant or the young's modulus of the material. the extension of the hook's law where the shear stress is directly proportional to the shear strain. ζ α γ ζ - shear stress. γ - shear strain. ζ = Gγ where G is the modulus of rigidity. A pure shear stress at a point can be alternatively presented by the normal stresses at 450 with the directions of the shear stress. σ1 = -σ2 = ζ. using this principle you get G = E/(2(1+ ν)) is the 1 equation. where, ν is the poisson's ratio.this is the basic relation between E,G, ν. the change in volume per unit volume referred to as the dilation. e = εx + εy + εz the shear strains are not taken into account because they do not contribute to any volume change. for an isotropic linearly elastic materials for use with Cartesian coordinates εx = σx/E - νσy/E - νσz/E similar equations are formed for εy ,εz . e = εx + εy + εz = ((1 - 2ν)/E)( σx+ σy+ σz) if σx= σy = σz = -p like a hydrostatic pressure of uniform intensity then -p/e = k = E/3(1 - 2ν) is the 2 equation where k is the bulk modulus. Addin 1 & 2 by bringing only the poisson's ratio to left side and taking all other constants to the right side the equation formed is the 9/E = 3/G + 1/k is the relation between the three modulus. here...
Newtons times meters this is know as what?
joules
Who said for every action there is a reaction?
Sir Isaac Newton said that for every action there is an equal and opposite reaction.
What is the known value of Young Modulus for Spider silk?
The Young's modulus of spider silk is 1 E10 Newton's per square meter. Comparatively, the modulus of high tensile steel is only 2 E11 Newton's per square meter.
What is the amount of stress applied to a material divided by the elastic strain caused by that stress called?
This is known as the Modulus of Elastisity, or Youngs Modulus (in tension/compression) and will be a constant as long as the deformation is in the elastic range.
What is the linked between modulus of elasticity and modulus of rigidity?
It is around 40 GPa.
Known value of Young's Modulus for beech?
physics coursework??
Who is Neil youngs dad?
Scott Young, a well-known Canadian sportswriter.
What is the types of modulus of elasticity?
1. Young's modulus of elasticity, E, also called elastic modulus in tension 2. Flexural modulus, usually the same as the elastic modulus for uniform isotropic materials 3. Shear modulus, also known as modulus of rigidity, G ; G = E/2/(1 + u) for isotropic materials, where u = poisson ratio 4. Dynamic modulus 5. Storage modulus 6. Bulk modulus The first three are most commonly used; the last three are for more specialized use
Known value of Young's Modulus for mild steel?
the modulus for brass is 91*109 Nm-2
Known value of Modulus of Rigidity for Cast Iron?
http://www.engineeringtoolbox.com/modulus-rigidity-d_946.html
Solids liquids and gases. which ones are hard to deform?
When we talk about deformatation, we are referring to two properties, namely Elasticity and Plasticity. These properties are measured using constants known as " Moduli of Elasticity". There are 4 such moduli: Young's Modulus Axial Modulus Rigidity Modulus Bulk Modulus The larger the value of the Bulk Modulus, the harder it is to compress the material.
What is the difference between the modulus of rigidity and modulus of elasticity?
We knew from Hook's law- "stress is proportional to strain." So, stress = k * strain [here, k is a constant] or, stress/strain= k Now, if the stress and strain occurs due to axial force then k is known as modulus of elasticity and it is denoted by E. if the stress and strain occurs due to shear force then k is known as modulus of rigidity and it is denoted by G.
What is the distance from a point on the number line to zero otherwise known as?
The absolute value or the modulus.
What was newton most known for?
newton was most knon for his law of gravitation
