answersLogoWhite

0

Maintenance light Toyota Prius reset

Updated: 10/24/2022
User Avatar

Wiki User

13y ago

Best Answer

Disclaimer: The light is reminding you to change your oil.

1. Press "Power" with the brake pedal applied in the same way you would normally start your car.

2. Press the "Odo/Trip" button such that the regular odometer reading is showing rather than one of the two trip odometers.

3. Press "Power" again to turn off the vehicle.

4. Hold down the "Odo/Trip" button, hold down the break pedal and then press "Power".

5. Keep holding the "Odo/Trip" button for three or so seconds and then release the button.

That's it! Just make sure to change your oil.

This doesn't work for a 2010 Prius. Here how to do it for a 2010 Prius:

1) With the power on, switch to the odometer/trip-meter to display "TRIPA".

2) Power OFF (push the "Power" button).

3) Power ON, while holding the button for toggling between "km/h" and "MPH"

4) You will get a screen showing the reset of the oil change data.

5) When the reset is complete, release the button.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Maintenance light Toyota Prius reset
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you Reset Maintenance Warning Light on a 2008 Toyota 4Runner?

How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner


How do you reset check engine light for Toyota Prius?

To reset the engine light on a Toyota Prius, disconnect the negative battery cable and let off for about five minutes, then reconnect it. The light should go off after the first couple start ups.


How do you reset the maintenance light on Toyota Camry?

A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.


How do you reset maintenance light on Toyota Corolla 2010?

How do you reset maint read light on 2010 corolla


Reset the maintenance required light on 08 Toyota rav 4?

maintenance with engine


How do you reset the maintenance light on a 1999 Tacoma?

Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.


How do you reset the maintenance reqired light in the 2011 smart key Toyota RAV4?

How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system


How do you reset the maintenance required light on a 2007 Toyota Tacoma V6?

disconnect the battery


Toyota rave 4 You changed oil how do you get the oil maintenance light required now to go out?

Your drivers manual should give you the information to reset the oil maintenance light.


How do you reset the oil light on a 2011 Toyota Sienna le?

Set it to trip A and hold reset turn ignition off then turn ignition on and maintenance light will flash and your done.


How do you reset maintenance light on Mercedes S550?

how to reset maintenance light on mercedes s550 amg


How do you reset the maintenance required light on a 2011 Toyota RAV4?

You will need to take it into a mechanic. They will be able to check out your vehicle and then they can turn off the light.