You'll have a total of three fuel lines associated with this saw. The line, in the tank, with the fuel filter attached goes to the fuel pump side fitting of the carburetor. The line, in the tank, that is about only an inch or so in the tank is the return line and originates at the "out" nipple of the primer bulb. And the third and last line goes from the "in" nipple of the primer bulb to the carburetor fitting furthest away from the fuel pump side. Note that the fuel pump side of the carburetor is the side that integrates the throttle idle speed screw."
That return fuel line is a booger if you don't have to replace the main fuel line. The orifice is hidden from view UNDER the hole for the main line. However, I got it replaced and the old McCulloch works fine again.
For Model 4600
need a diagram for mcculloch eager beaver chain saw
041000124 ^^ That routing number is not correct for illinois. 071921891 is the routing number for illinois. confirmed today with national city.
You are correct that the SL2 uses a timing chain. However, since it uses a timing chain it does not need to be replaced as does the timing BELT. In general, a timing chain should last the life of the engine.
Routing what?
You need to do this on your own not searching it
All you need to do is take out as many links as you need to get it to the correct tension. They aren't like others where you pull the tire and rim back in order to tighten the chain.
I need an answer to this also!
It has a timing chain... therefore it won't need to be replaced... if I am correct?
what is BNI routing number
073972181
You do not need the routing number if you are going to that person's bank and making a deposit. You would only need the routing number for an electronic transfer.
tony griego I need a routing diagram for a 1998 ford escort zx2 please