0
Need to connect Sony Bravia klv32ex400 which has no clear audio-out port to 5.1 channel surround without HDMI so where do you connect the 5 cables from the surround sound system to the HDTV?
Wiki User
∙ 13y ago
The KLV32ex400 has no surround output capability. The only audio output is a stereo 1/8" headphone jack. If you are using a Blu-Ray or HD cable or satellite receiver, you can run an optical or coaxial digital cable from those directly to the receiver for surround sound.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you connect Sony Bravia KLV32EX400 to a 5.1 channel surround sound system?
The KLV32ex400 has no surround output capability. The only audio output is a stereo 1/8" headphone jack. If you are using a Blu-Ray or HD cable or satellite receiver, you can run an optical or coaxial digital cable from those directly to the receiver for surround sound.Read more: Need_to_connect_Sony_Bravia_klv32ex400_which_has_no_clear_audio-out_port_to_5.1_channel_surround_without_hdmi_so_where_do_you_connect_the_5_cables_from_the_surround_sound_system_to_the_HDTV
How do you connect a surround sound to a PS3?
Connect your PS3 to your TV then connect you surround sound to your TV.
How do you balance surround sound speakers?
Usually you wouldn't need to but if you wanted to offset it from balanced or if your connection has a stronger signal in one channel than the other you can connect a preamp or an amplifier with balance control and audio inputs as well as out puts to the system. You would connect the wires going in to the surround system into the input of the preamp and then connect the output of the preamp into the input of the surround system. CAUTION do not turn the preamp volume up to high or you risk blowing the surround system.
How do you connect a laptop to a surround sound?
Audio out or headset out from the laptop to audio IN on the surround unit. The audio level on the laptop might need to be set at MAX to get enough volume for the surround to use properly. To hear a full surround sound signal you will need to have content that is stored in a surround sound format and a sound card that supports multi-channel audio outputs.
I have a apex tv i want surround system what kind of cables do i need?
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
How do you connect the DS to the Mii channel?
You cannot connect the Nintendo DS to the Mii channel
How do you get four pairs of speakers into a receiver?
you could connect them all to each other then connect them to the receiver. or if you wanted a surround sound experience you could connect the biggest directly to the left and right channels respectively and then connect two of the pairs one set at a time as follows... left surround front (positive to receiverL+, negative connects to the positive of the left surround rear, negative of the left surround rear goes into the receiverL- ) on the right side ( right surround front + goes to receiver, (-) goes to the (+) of the right surround rear, the (-) of the right surround rear goes into the receiver.) this changes the sound frequencies the speakers are best at supporting because it changes the ohms of the speakers. this is called wiring in a series. as opposed to wiring the speakers all together + to + ,- to - , which is called wiring in parallel. Then with the last set of speakers set them at the very rear of the soundstage and wire the left speaker's positive into the left positive connection on the receiver then the negative of that speaker into the positive of the right channel. Then wire the positive of the right speaker into the positive of the right channel on the receiver and the negative of the right speaker into the positive of the left channel. this will only play the surround channels of the signal. test these speakers out alone if you want to hear the surround sound effect by itself. In music it will be the background singers ect. (if you have ever wondered how a surround system gets extra channels out of two analog wired channels now you know :)
How do you hook up netgear neotv streaming player to a surround sound?
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
Can you install a 2.1 channel speaker into a 5.1 audio system?
If the speakers are passive and you can connect a line input into the sub separately, then yes. Most receivers can be configured for only two front speakers and a sub, although you will be losing all of the surround effect and the center channel benefits.
What is 7.2 surround sound?
7.2 surround sound is dual subwoofers. Usually its only 7.1. If you have a 7.1 receiver then a simple y cable can allow you to connect two powered subwoofers. True 7.2 surround is actually two different LFE (low frequency effects)(your subs) with a left and a right channel. Using a "y" cable wouldn't be 7.2 it would be 7.1 with two subs.
Can I buy a DVD player with surround sound?
A DVD player does not have surround sound built into it. You can purchase surround sound speakers and connect them to the DVD player. This will make your movie experience much better.
What is the IDE channel to connect hard drives?
The best IDE channel to connect on a hard drive is the Primary IDE channel, Also known as IDE 1 in dell computers
