Want this question answered?
Turn it off and back on. They print the configuration page every time the power is interrupted.
I think you mean "How do you stop the Xerox Phaser 6180 from printing the configuration pages when starting up".The only way to do this is to press the Red "C" Cancel job, button on the printer control panel (on top of the printer itself) straight after the diagnostics have finished, it will say "Warming-up" and a green and an orange light will come on. Immediately after the orange light has gone out, approximately 8-10 seconds after switching on, press the Red "C" Cancel job button for 2 seconds. Tried and works ok, just a pain in the proverbial...
If you turn off the printer/copier before you unplug it, then its no problem, but if the applicance is on and you all of a sudden unplug it, then it can cause damage.
we have a questions about printer canon 4570error e000110-0001 this is error code we need tu help, the printer has a problem tu wark
Sort of - you can make a photocopy of anything you can place on the copier platen, but it may not turn out as your expect. The image of a person's behind is distorted because it is spread out on the platen, and, because the machine is not designed for that sort of weight, the glass platen and other parts may be broken causing you injury and your employer or school unnecessary expense.
Thermal printers, still used in many stores and gas stations use no ink but require special temperature sensative paper that 'burns' when printed on. If you iron a piece of this paper it will all turn black. It is usually very shiny on the printing side and the image may be easilly scratched. The image may fade with time because of the thermal sensitivity of the paper.
You need to go to your local library and pick up the reference book/manual about this car. You can xerox copies of what you need to know, if they won't let you 'check it out'. That should help you out a lot. OR you could purchase a "how to" manual from a shop like Advanced Auto or Auto Zone....or just call them. Whatever is easier for you. I am sure they can give you some pointers. Hope that helped! If the '89 is like most late model Camrys,you unplug the connector,then turn the bulb about 1/4 turn to the left.It then should come right out.
You receive lose a turn and you must wait the rest of your turn, then when it is your turn to use your turn, you must wait that turn
turn on turn on turn on
it was not its turn
Where you do a full turn or a half turn
A Y and K turn is the same type of turn. It is sometimes called a broken U turn. This type of turn is a 3-point turn.