0
Under parallel ata, two types of ribbon cable are used. The 80-conductor ide cable has 40 pins and 80 wires Forty wires are used for communication and data, and an additional 40 ground wires reduce crosstalk on the cable. An older 40-conducror cable has 40 wires and 40 pins. the two types of cables are PATA and IDE cables which come in a 80-conductor IDE cable and a 40-conductor cable
Wiki User
∙ 14y ago
Wiki User
∙ 14y ago[1] 40-conductor (40 pins and 40 wires) IDE cable [2] 80-conductor (40 pins and 80 wires) IDE cable.40-pin flat data cable or an 80-conductor cable and a 40-pin IDE connector.
Wiki User
∙ 14y agoExternal serial ATA cable, and Internal serial ATA cable
Wiki User
∙ 15y agoPATA data cables are available in two different types. The types are distinguished by the number of conductors. Which two types are available? (Choose two.)
Wiki User
∙ 14y ago80 pin IDE cable
40 pin IDE cable
80 pin will connect 2 drives and 40 will connect 1 drive
Wiki User
∙ 14y agoPower Cable and Data Cable
Add your answer:
Earn +20 pts
What is PATA Drive?
Parallel ATA (PATA) is an IDE standard for connecting storage devices like hard drives and optical drives to themotherboard. PATA generally refers to the types of cables and connections that follow this standard.It's important to note that the term Parallel ATA used to simply be called ATA. ATA was retroactively renamed to Parallel ATA when the newer Serial ATA (SATA) standard came into being.PATA cables are long, flat cables with 40-pin connectors (in a 20x2 matrix) on either side of the cable. One end plugs into a port on the motherboard, usually labeled IDE, and the other into the back of a storage device like a hard drive.Some PATA cables have an additional connector midway through the cable for connecting yet another storage device.PATA cables come in 40-wire or 80-wire designs. Most modern storage devices require the use of the more capable 80-wire PATA cable to meet certain speed requirements. Both types of PATA cables have 40-pins and look nearly identical so telling them apart can be difficult. Usually though, the connectors on an 80-wire PATA cable will be black, gray and blue while the connectors on a 40-wire cable will only be black.Also Known As: PATANote: Even though PATA and SATA are both IDE standards, PATA (formally ATA) cables and connectors are often referred to simply as IDE cables and connectors. It's not a correct usage but it's very popular nonetheless.Examples:"My motherboard has 4 slots labeled IDE. I used a three-connector PATA cable to connect my hard drive and CD burner to one IDE port and used another PATA cable to connect my backup tape drive to the second IDE port. It's good to know that I have two more IDE ports left on the motherboard for future use if I need them."
How do sync cables work with devices that are plugged into a computer?
Sync cables are used to synchronize data on two devices. One of the items are usually a computer/laptop, the other is a small mobile device such as an MP3 player, cellphone or PDA. These cables are used to help store and organize large amounts of data on a computer than a smaller device.
What is a Good computer CD drive?
There are two types of cd/dvd drive available. Sata and Pata. Sata uses a small sata cable whereas pata uses an older ribbon style IDE cable. Sata is the best of these two but not all computer support sata, in those cases ide will do. As far as brand goes there is not much difference but the Pioneer, LG and Liteon drives tend to be reliable.
What are the four most common data types?
Common data types vary depending on the hardware, the application and numerous other factors. Therefore there can be no definitive list of the most common data types. Below are a few that are frequently found in a variety of applications: Text or string data Integer values, frequently 2, 4 or 8 bytes long Floating point numeric data, usually several bytes long Boolean data (i.e. true or false) Byte (a single byte that holds data defined by the application) Word (two bytes holding data defined by the application) There are many more data types not listed.
What two types of cables would most commonly be used for new runs?
Fiber or Cat6, depending on the funds available and the size of the network.
What are the two different types of PATA data cable?
40 and 80
What two types of interfaces might be used by an internal DVD drive?
PATA or SATA
What are two types of parallel ATA data cables used with hard drives?
80 conductor IDE cable; 40 conductor IDE cable
What does data cables do?
the data transferring between two nodes(transfer of data may be bw two PCs or bw a PC and mobile ,PC and networking device) depends on cable used in it. mostly in today world data is transferred digitally i.e. in a streams of o and 1 only. (for more info:see physical layer of osi network model) various data transfer cables are:UTP cables,ethernet cables,coaxial cables.
What is PATA Drive?
Parallel ATA (PATA) is an IDE standard for connecting storage devices like hard drives and optical drives to themotherboard. PATA generally refers to the types of cables and connections that follow this standard.It's important to note that the term Parallel ATA used to simply be called ATA. ATA was retroactively renamed to Parallel ATA when the newer Serial ATA (SATA) standard came into being.PATA cables are long, flat cables with 40-pin connectors (in a 20x2 matrix) on either side of the cable. One end plugs into a port on the motherboard, usually labeled IDE, and the other into the back of a storage device like a hard drive.Some PATA cables have an additional connector midway through the cable for connecting yet another storage device.PATA cables come in 40-wire or 80-wire designs. Most modern storage devices require the use of the more capable 80-wire PATA cable to meet certain speed requirements. Both types of PATA cables have 40-pins and look nearly identical so telling them apart can be difficult. Usually though, the connectors on an 80-wire PATA cable will be black, gray and blue while the connectors on a 40-wire cable will only be black.Also Known As: PATANote: Even though PATA and SATA are both IDE standards, PATA (formally ATA) cables and connectors are often referred to simply as IDE cables and connectors. It's not a correct usage but it's very popular nonetheless.Examples:"My motherboard has 4 slots labeled IDE. I used a three-connector PATA cable to connect my hard drive and CD burner to one IDE port and used another PATA cable to connect my backup tape drive to the second IDE port. It's good to know that I have two more IDE ports left on the motherboard for future use if I need them."
What are the different data types?
Theres two types of data, Continuous and discontinuous data.
What are they two types of data?
Empirical data and Historical data.
Does PATA have two connectors on a motherboard?
Yes, there are two PATA connectors available on the motherboard, so you can connect PATA hard disk through this motherboard.
What are the two basic types of cables found inside a computer case and what are their basic?
This is a good example of a question you might get in a bad computer repair class.Never assume you know what a cable does.Always study the motherboard and see where every cable is connected. Then identify what the function of the cable is.That said. In a generic Personal Computer there are typically only two types of cables. Data and Power. Data connects the motherboard bus to your equipment (eg. HardDrive). Power cables feed power from the DC converter to your equipment.
What are two types of software?
Applications and data are two types of software.
Parallel ATA allows for connectors on a motherboard for 40-pin data cables?
For Two Connectors on a motherboard for two 40-pin data cable.
What are the 2 types of data allowed in QBASIC?
the two types of data used in Qbasic is numeric data and alpha numeric data.
