It is screewed into the top of the engine block just behind the distributor. It is about 3 inches long with an electric wire pluged into the end of it. You will have to climb up and lean over the engine to see it. HARD TO SEE. But it's there.
It is in the fuel tank.
between the intake and the firewall on top of the block
The oil pressure sending unit is on the top rear of the engine, next to the distributor.
The oill sending unit is almost always on the back of the motor by the fire wall.
The 1997 Dodge Dakota oil sending unit is in the oil pan, on the bottom of the engine. You will need to remove the oil pan in order to view the sending unit.
No
need to know which sending unit you are looking for, there are several sending units on that vehicle.
The gas gauge sending unit would be located in the fuel tank.
oilk sending unit on nissan 200sx located
The oil sending unit on a 1997 Honda Odyssey is directly above the oil filter. The oil filter is on the rear of the engine.
Usually the sending unit (float assembly) in the tank has failed.Usually the sending unit (float assembly) in the tank has failed.
The 1997 Chevrolet Camaro 3.8 liter engine coolant temperature sending unit can be found on the front of the engine. The coolant temperature sending unit will be approximately 3 inches above the thermostat housing.