Worked for me
I don't know about your remote, but try these: 10178, 10463, 10765, 10150, or 11498.
I heard from a saleman at HHGregg that Seiki uses Samsung parts. And for anyone who can't get their Comcast or Direct TV remote to learn the Seiki code... try using a Samsung code. It worked for me, I used code 10178!
I believe I've tried every combination, spoke to people at Comcast and LG and still can't figure it out.Any ideas?I was told that LG used to be Goldstar so I tried the Goldstar codes and sure enough the "0178" worked for me. I used it on my 42LG50's. I would assume it will apply to other LG LCD's as well.Hope this helps!Goldstar 0030, 0178, 0001Depending upon your comcast remote the codes may slightly differ. My remote (the one with red ok button) takes 5 digit codes. I used the goldstar code 10178 for my new LG Flatron M23WD and it worked! Just check the comcast site for the appropriate codes for your remote.
I had the same problem with my proscan 40lc45s and the remote from comcast. I called proscan at 888-977-6722. They were very helpful. Codes 10178, 10029, 10030 and 10019 all worked. Hope this helps
What model TV is it. Here are some that I have laying around: 11447 10047 10051 10451 10178 10055 11347 Try going to your Remote Control device's website. If you search for GE, you'll probably get about 1,000,000 results.
There are many different versions of the Vizio TV so to program your one 4 all remote try the following codes, three digit remote codes; 502, 627, 004, 113, 505 or 011. Four digit remote codes; 1758, 0178,1756, 0128, 0117, 1017, 1078, 0030, 0056, 0205 or 1292. Five digit remote codes; 10178, 10117, 11756, 11758, 01377, 10885, 10864 or 10120.
code is: 10178 You press and hold mute/ select for 5 seconds, light blinks 3 times and enter code. -Chris Noller, San Jose, CA
I contacted Westinghouse1-800-701-0680and was emailed"ZW1112613 VR-40 Firmware for TW61901-S040C‏"I simply loaded the file to a thumb/jump drive and inserted it into the USB port on the TV. I also had to use a Samsung universal remote code. I have Comcast remote with the red "ok" button and the code was 10178. I am now able to adjust the volume and turn the TV off with the Comcast remote. It was a bit of a pain but now I no longer duel wield remotes in bed. I hope you find this helpful and that you post your own tips to pay it forward.
There are many codes available for an RCA tv. The main codes that work are 805, 627, 725, 503, 003, 641, 630, 830, 619, and 742. The related link below will allow you get additional codes if needed!
After checking wiki about Coby I found out that Coby also is the OEM for Samsung. I'm using a S10-S3 At&T standard remote (black) but this should probably also work for S1 & S2 models. If the Coby codes don't work try the Samsung codes. I got my TFTV3229 AT&T U-Verse remote to successfully program. I'm not sure which code exactly but I believe it was 1041. Here is the full list of Samsung codes, try them all for your Coby tv; 1006, 1026, 1041, 1042, 1043, 1046, 1047, 1049, 1081, 1082, 1083, 1084, 1085, 1100, 1136, 1137, 1138, 1139, 1171, 1176, 1189, 1214, 1223, 1311, 1314, 1345, 1359, 1364, 1366, 1370, 1375, 1442
One Life to Live - 1968 1-10178 was released on: USA: 30 April 2008
I have provided the TV remote codes for the Curtis Mathis TV.They are: 680, 645, 712, 670, 674, 516, and 506.I have also provided instructions on how to program the DISH remote to your TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.