Want this question answered?
remove the metal hinge or use a machete :)
Sleeve bearing
Remove the inside boot trim and then pull away the metal clip holding it in. It can then just be pulled straight out from outside the car.
for a full metal yo-yo, center track bearings are one of the best, but konkave are also good.
bearing
There is no simple formula to calculate the metal bearing clearance. Manufacturers must specify the clearance for each individual bearing.
in friction type the bearing metal is direct contact with shaft metal, but in the antifiction the rolling element is contact with the bearing races only.
Hematite is a metal-bearing ore, but it's not a metal itself.
Squeeze the center with your hands near the metal trim. It will come off
remove interior light by using a flat tool or knif then remove white backing plate by genitally pressing two lugs together then remove bottom of aerial base this is metal then unscrew base
When a mechanical bearing becomes overheated for whatever reason, the lubricating material will become less viscous, and the danger of metal-to-metal contact increases. This will lead to the failure of the bearing.
ores