First use large screwdriver to fit between caliper and pad to force piston back, now remove caliper, take out old pads, fit new ones in same place, tighten caliper.
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
With a mechanic!
There wasn't a 1991 Dodge Stratus.
take it to a qualified dodge mechanic
It is important to have all the parts in a car in the best condition. The minimum front brake rotor thickness for this car is 21.4 millimeters or 0.843 inches.
replace front brake rotors and pads.
Under, on the drivers side front of engine. Not an easy one to replace.
No, a Stratus engine sits transverse, while the Intrepid sits front to back.
The front spindle must be removed as the bearing is pressed in. Not a job for a beginner, but if you have some auto expertise, not too difficult...
Struts
Behind the front motormount
left front fender, in front of tire