Like any power switch you have Power in, Ground, Switched Power out and the Switch Terminal.
I assume you are talking about the starter solenoid: Follow the positive battery cable from the battery - the other end will be connected to the starter solenoid.
Find your model number and look for wiring diagram at sonnysbolens.com
Look for loose connections at the battery, starter solenoid, starter and switch. If all connections are good, the starter solenoid probably needs to be replaced.
There is normally a second starter-position solenoid under the clutch pedal. It probably is not getting contacted when you step on the pedal.
I assume you mean a starter solenoid. Look at how the old one is hooked up. Put the new one in that way. ...and disconnect the battery first.
Where can we find a simplicity riding mower model 284707 belt diagram
Contact Sears or check their web site.
Look for a loose or corroded battery cable. If the cables are ok at the battery, check the connection at the starter and at the starter solenoid. Otherwise, the solenoid may need to be replaced.
i need to see belt digram for a 4518 honda riding mower
Depending on what model mower you have, there could be several problems. But, start by checking the fuse. Most mowers have a fuse that is located near the starter solenoid.
battery, solenoid, starter, engines locked up from overheating, or a bad switch (IE seat brake deck blade engagement swithces)
If it is a riding mower it may have a blown fuse. They are usually located near the solenoid.