Answers.com > Wiki Answers > Categories > Cars & Vehicles > Asian Cars > Honda > Honda Accord > S lite flashing on 91 Honda accord?

S lite flashing on 91 Honda accord?

In: Honda Accord [Edit categories]

Answer:

The S light blinks to inform you of a malfunction picked up by the TCU. When the A/T control unit senses an abnormality in the input or output systems, the (S) indicator light in the gauge assembly will blink. However, when the Service Check Connector (located to the lower right of the glove compartment) is connected with a jumper wire, the (S) indicator light will blink the problem code when the ignition switch is turned on. When the (S) indicator light is on, connect the two terminals of the Service Check Connector together. Then turn on the ignition switch and observe the (S) indicator light.Problem codes 1 through 9 are indicated by individual short blinks, Problem codes 10 through 15 are indicated by a series of long and short blinks. One long blink equals 10 short blinks. Add the long and short blinks together to determine the problem code.I hope this helps and good luck, if you are not a hands on person you can take the car to your local Honda dealer but it may cost you a lil more dough WEBSITE WITH DIAGRAM http://autorepair.about.com/library/faqs/bl189f.htm
The S light blinks to inform you of a malfunction picked up by the TCU. When the A/T control unit senses an abnormality in the input or output systems, the (S) indicator light in the gauge assembly will blink. However, when the Service Check Connector (located to the lower right of the glove compartment) is connected with a jumper wire, the (S) indicator light will blink the problem code when the ignition switch is turned on. When the (S) indicator light is on, connect the two terminals of the Service Check Connector together. Then turn on the ignition switch and observe the (S) indicator light.Problem codes 1 through 9 are indicated by individual short blinks, Problem codes 10 through 15 are indicated by a series of long and short blinks. One long blink equals 10 short blinks. Add the long and short blinks together to determine the problem code.I hope this helps and good luck, if you are not a hands on person you can take the car to your local Honda dealer but it may cost you a lil more dough WEBSITE WITH DIAGRAM: autorepair.about.com/library/faqs/bl189f.htm

First answer by Mastamatt. Last edit by Mastamatt. Contributor trust: 1 [recommend contributor ]. Question popularity: 1 [recommend question].

[report abuse]

Can you answer these Honda Accord questions?

	How many sump filter in automatic transmission?	Answer it!
	Why are your taillights not working?	Answer it!

Relevant answers:

Where is the 91 Honda Accord igniter?
I believe the part you're asking about is inside the distributor. It's the semiconductor device that causes the coil to fire.
Where is the thermostat on a Honda accord 91?
The only one I know of that check ur temperature is the Sensor and it is located under the distributor...to the left of the cylinder. it is underneath and has a wire going to it....you need a wrench...
What does flashing a Honda accord computer do?
The computer reads all sensor data and chooses the settings for fuel injector duration, ignition advance, cam set (in VTEC engines), and a whole host of things necessary to balance fuel efficiency...
How do you take out the radio in a 91 Honda accord?
Remove The Screws, Remove the change holder there is one in there, 2 under the radio (where it is mounted), you also have to remove all the screws around your dashboard because it is all one peice...