USING THE MULTI-FUNCTION DOOR CONTROL: Enter a four-digit personal identification number (PIN) of your choice on the keypad.
Then press and hold ENTER.
While holding the ENTER button,
press and hold the LIGHT button on the Multi-Function Door Control.
Continue holding the ENTER AND light BUTTONS
WHILE YOU PRESS THE PUSH BAR ON THE Multi-Function Door Control (all three buttons are held).
Release buttons when the motor unit lights blink.
It has learned the code. If light bulbs are not installed, two clicks will be heard.
This information was found on a competitors web site for the same model Keyless entry model 976 key pad. ------------------------------------------------------------------------------ I don't have a Multi-Function door control with a light button, so I had to change the instructions slightly. My garage door opener has a learn button on the overhead unit. Here's what I did and it worked! 1. enter your chosen 4 digit code on they keypad. 2. Press and hold the "enter" button. 3. Press and hold the learn button on the overhead unit. 4. When overhead light blinks, release both buttons. Thank you soooooooo much to Paul Messer for the original instructions. I purchased a new home and the previous owner
didn't leave the instructions. I've been at my new house for about a year and I can finally use my own keypad!
http://www.bobvilla.com/wwwboard/messages/147096.html ------------------------------------------------------------------------------ We recently purchased a HUD home and were having the same problem since we didn't have the original code. We have a Craftsman 1/2 HP door opener which has a learn button, the method that worked for us is (This could require 2 people, but I took the keypad off so I could do it myself):
Just pull the trigger
Look in the Sears and roebuck catalouge.
One may purchase a Liftmaster brand remote for a garage door at Sears department stores. They sell complete garage door opener system and replace parts such as the remote for the Liftmaster brand.
http://homeappliance.manualsonline.com/mdownloads/10381be4-acdb-43e8-a7d2-164373a421ef.pdf
There are different stores that sell a variety of remote car starters. Walmart sells one model for about $500 without tax. Auto Zone, Sears, and Best Buy also sell remote car starters. Nowadays you can also ask dealerships for cars with remote starters.
Remote control snowmobiles can be purchased from Amazon, eBay, Sears, Hammacher Schlemmer, Cabela's, A Main Hobbies, RadioShack, 3000 Toys, Yo Yo, and Tower Hobbies.
I have heard that the Element brand is made by the same factories as the Emerson and Sylvania brands of tv's. If you are looking for Universal remote codes, the numbers for Emerson and Sylvania worked on my learning remote. Also try the codes for Proview brand.
If you want to add a remote, press the "set" button on the power unit until the green light blinks, then press the button on the remote. If you want the unit to forget all old codes and accept only the new remote, hold the "set" button until the green light stays on solid, then press the remote button.
Standing in front of the garage, looking in. On the left hand side of the opener , there should be a square button next to where the wall button wires are attached. Push this button and it should flash. Then push the button on the remote and the light should go out. It is now programed to accept the new transmitter. If you are installing a key pad, push the button on the operator and then you have 30 seconds to put in a 4 digit number in the keypad and then hit enter.
On back of motor unit is a red button next to an LED. Push button until LED stays on. Go to keypad, enter your nex code then press <Enter>. Viola!
You can buy the best and latest remote control toys for kids from hobby work. We have a lot of RC toys. You can visit our site and buy the latest RC toys for your kids.
If the remote is rectangular (approx 1 3/4" X 3") with 1 large button and 2 small round buttons, insert a screwdriver in the slot in the bottom end of the remote at each corner and gently twist. The unit will pop open. Be sure an plase the new battery plus side down.