I have this remote, and needed the same help. I looked up another Sanyo remote model and just used those numbers for Magnavox and finally found one that worked. 113, 115, 145, 149, 132, 133, 135, 101, 102, 104, 111, 112, 117, 121, 123, 129 Just hold down the "TV" button and try each of these, the button should flash 5 times if you entered it correctly, but it may not be the correct code for your television. Hope this helps anyone else with this problem
It is the tv that has the set code. Then you need to program the remote to that. Google the manufacturer and make.
I had a similar problem and used the code for the Sanyo FXWK. The two remotes seem similar and the codes for that worked on my FXWJ remote. You can find the codes here: http://remotes.com/store/codes_original.html . Hope this helps.
what are the codes for a sanyo universal remote
You can't program FXTG remote.
I have a Sanyo tv and a magnavox dvd,what are the codes?
code nomber for sanyo-t.v
The codes relate to the tv set and not the remote. Google the set or sanyo and you will get the code. You then need a universal remote to programme to that code or the instructions for the Philips remote to see if that can be reprogrammed. Again Google Philips and the make.
Dynatech the best TVs, good quality, you like
Sanyo TV codes are 10054 and 11142.See the related link below.
Unlock system
That depends on the model of Sanyo TV. If that isn't apparent to you then you shouldn't be allowed to use the internet unsupervised.
Press Menu on the remote, select Setting, select Lamp Counter