First check the fuse. If this is ok the problem is most likely the “Flasher Unit”. The Flasher Unit is located behind the dash.
my turning signals dont work on my 91 integra LS. They were working a day before. so the next day they werent. I also had battery problems but i had checked every single fuse and the fuses arent burn. My turning signals do not work what so ever.
you could have crossed the wires somehow or caused them to short out.
Sounds very much like the distributor
The PA Motor Vehicle Code, § 3334. Turning movements and required signals- says that you will use your turn signals or hand signals when you are turning or changing lanes.
Check the bulb it is double filamented with the smaller being for the stop and turn signals
Check the bulbs first but it can also be the flasher.
That is a good thing. You want the turn signals to work.
I can't say for your specific year but I was just working on a 94 model and on the right side of the bike is the fuse block and the top fuse which is 15A powers both the turn signals and the brake light.
Their is no Possible way :) :(
if only the turn signals are not working,you should replace the flasher can
I have found that moisture can cause that problem you may also want to check your fuse and bulbs if you see moisture try to get it as dry as possible
Grand theft auto iv