0
The needle valve is used to control the amount of gas flowing to the burner. The air valve controls the amount of air.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What energy does a Bunsen burner use?
It uses methane gas
Why does the blue falme on the Bunsen burner make a hissing sound?
The hissing noise is most likely the gas moving through the line. Anything that uses gas will make this sound.
What does a magnetic compass do?
It uses a magnetic needle to point to the earth's magnetic North Pole. The only other type of compass used is a gyro-compass. This uses a wheel which rotates parallel with the earth's rotation.
Why we use odd harmonic and do not use even harmonic?
That is not true. When you overdrive a valve triode you produce even harmonics.Aphex AudioXciter uses also only the even harmonics.
Where can ball bearings be found?
If you need replacements, they can be bought at a hardware store. If you mean applications/uses ... bicycle wheels have ball bearings. Lots of rolling objects that move around an axle have either needle bearings or ball bearings or roller bearings.
Functions of different parts of Bunsen burner?
parts and uses of the Bunsen burner
The Bunsen burner uses a mixture of gas and what?
air
What energy does a Bunsen burner use?
It uses methane gas
Why is the Bunsen burner not used for heating?
the bunsun burner is used for heatin it just has other uses also
What gasses come from a Bunsen burner?
The Bunsen burner uses natural gas to burn. Methane, CH4. Below is the equation of Bunsen burner combustion. CH4 + 2O2 --> CO2 + 2H2O Methane burns combined with oxygen gas ( with ignition from a flame ) from the air and carbon dioxide and water are the products of this Bunsen burner reaction.
Why is it safer to evaporate alcohol using an infra red heater rather than using a Bunsen burner?
The Bunsen burner uses an ope flame, making it easier for the alcohol to ignite.
What is the uses of Bunsen burners?
A Bunsen Burner, is piece of equipment particularly used in a science lab. The Bunsen Burners creates a gas flame which is used to assist in experiments. The Bunsen burner originating from 1852, given the name by Robert Bunsen.
What uses of alcohol burner?
Alcohol burner, also referred to as backpacker is used to replace a Bunsen burner due to its light weight, simple style and it is handy.
What is a Bunsen burner and what is it's uses?
From Wikipedia (see Link to the left):A Bunsen burner is a device used in scientific laboratories for heating, sterilization, and many other uses.The device safely burns a continuous stream of a flammable gas such as natural gas (which is principally methane) or a liquified petroleum gas such as propane, butane, or a mixture of both.From ScienceByJones.com (see Link to the left):The Bunsen burner is used frequently in the laboratory as a source of heat. This burner is designed so that gaseous fuel may be mixed with the correct amount of air to yield the maximum amount of heat. In order to use this burner properly and safely, it is essential that you understand its construction and the adjustments that can be made.The three principal parts of the burner are: barrel, needle valve, and base. The quantity of gas admitted to the burner is controlled by the needle valve, while the air needed for combustion is admitted at the small opening around the bottom of the barrel. The air is controlled by turning the barrel so as to make the air holes larger or smaller.Always open the desk outlet valve fully and regulate the gas supply to the burner by the needle valve. Always extinguish your burner by turning off the desk outlet valve (and then closing the needle valve and barrel.) If there is an accident always shut off the desk outlet valve immediately.STEPS TO LIGHT BUNSEN BURNER:1. Check connections to burner and desk outlet valve.2. Close needle valve and barrel.3. Open desk outlet valve fully.4. Check for leaks with flame.5. While holding flame above barrel, open needle valve 1/2 turn.6. Adjust barrel and needle valve for blue in blue flame.Always light burner in open space on lab counter. After you have adjusted it for the flame needed move it into position. One person in lab group is always responsible for maintaining the burner and flame.Burner Procedure:1. Light the burner according to our rules. Observe the yellow flame which is produced because not enough air is admitted to give complete combustion. The yellow color is caused by small particles of unburned carbon which become incandescent.2. Now rotate the barrel until the flame is entirely blue. Two different zones should appear when the burner is correctly adjusted. Too much air should not be admitted as it may cool the flame or blow it out entirely. After having the teacher confirm a good hot, blue flame draw a diagram of the flame (use labels and descriptions). Indicate on your diagram of the flame where the hottest part of the flame is located.See the Web Links to the left for more information.Bunsen burner barrels can be rotated, either opening or closing the barrel, to adjust the flow of air or oxygen, thereby controlling the flame.
What is a Bunsen burner and its function?
A Bunsen burner is a device that is used to heat materials in science. It uses a flow of gas and an air hole to regulate the temperature of the flame.
What is the uses of burner in laboratory?
The use of the Bunsen burner in a laboratory varies. It is mainly used for causing combustion, heating items, and sterilizing items.
What is the difference between Bunsen burner and alcohol lamp?
Bunsen Burner: - Uses Gas - Achieves up to roaring blue flame - Used to melt solid objects Alcohol Lamp: - Uses Alcohol - Achieves Yellow flame only - Used to boil water
