Want this question answered?
The starter for a1997 Camry is located on top of the transmission. It should be visible from the top and easy to remove.
It is in the evaporator case. You do remove the glove box for access. You will be money ahead if you have a professional do the job as most shops will NOT come behind someone else. The EXACT amount of refrigerant is very critical.
You will need to remove the glove box assembly. There is a door behind the glove box where the filters are located.
behind the glove box on passenger side...you will have to remove glove box to get to it
You have to remove the timing belt and the engine pan. Only then you will be able to remove the pump.
Under the glove compartment. Need to remove the glove compartment to gain access to the computer
Can you replace your 2000 Camry CE 4-cylinder engine with a 1997 Camry engine?"
The crankshaft is located at the bottom of the engine. If you want to get access to it, you need to remove the oil pan.
You can check behind the glove box. You have to remove the glove box to access it. Use the owner's manual to know how to find it.
I have a 1997 Toyota Camry. It is leaking anti-frezze. I need to replace the water pump. Do I have to remove and replace timing belts too?
dose 1997 and 1999 of Toyota Camry has any difference
Resistor is located behind glove box. Remove 2 screw at bottom of glove box which attach hinges. Glove box comes right out. The resistor will be directly behind glove box. It will have a plug and 2 screws which hold it in place. Remove plug unscrew and pull out. Install in reverse order.