A match!
Once your lights are up there are three Phillips head screws that hold on a black light protecter(black piece around lights). Once that is off there are two torque heads for each light once you take them off. pull out the lights(just pull straight out and put in the new lights easy as that. i just changed mine on my 02 ws6 trans am hopefully yours have the same setup up good luck!!
Unscrew it and pull he back off it. once in be carful not to scratch the disc
No sound on the back pull of a scratch is because the Smart Scratch feature is active. Select the Scratch Panel and make sure Smart Scratch locks are grey.
Remove the head light cover plate, then remove head light braket, once you have done that pull the light out and un-plug it.
You will get pulled apart before reaching the singularity - as a result of the difference in gravitational pull between your head and your feet.
The way I do a back flip or back tuck from scratch is that I first jump straight up as I as I can. When I reach that height, I use my lower body to pull my hips over my head and use my arms to hold the tuck. To stop rotating at the right time I look for the wall in front of me and open up in a straight body.
When a sunflower has reached maturity and has been fertilized, the inner florets will begin to shrivel and you should see the seeds forming behind them. The seeds will usually be white with black stripes in garden varieties, or mostly black in oil varieties. Once this begins to happen, place some thin netting over the head to protect it from birds, and wait until the back of the head begins to brown. Once this happens, you can cut the head off. Additional drying for a few days may be helpful. Afterwards, you can simply pull the seeds out of the head.
Pull back the clip that retains it & just pull upwards. If you pry, be careful not to scratch paint.
Once you have turned on the head lights, pull the switch towards you twice. The first time that you pull it will turn on the rear fogs, the second should be the driving lamps.
there is no reason to pull the head to get at the oil pump.
pull up head rest should be a button push in an hold pull out head rest
Open the hood under there is a black cover over the head lights pull the center out o the pins there should be 2 then lift cover there should be two plastic pull handles that you need to lift up that lets that light assembly pull out then you can pull the light out from the assembly