Between $490-765. That's a range for a 2 ton to 5 ton residential a/c coil cleaning.
The fan coil filters is used for return air cleaning.
It is 2.5 ton with standard non-TXV evaporator coil.
It should be between $500-$750 to properly clean an evaporator coil.
Regular maintenance & clean up of air filters. ... Cleaning of Evaporator coils. ... Maintenance of condenser coil. ... Cleaning Coil Fins. ... Unclog the rear drain. ... Cover up the compressor unit during winters. ... Do not miss an AC service.
iv had the same thing happen to me ther are a fue things i might be 1 the coil lead is old and not carrying spark 2 the coil is stufft 3 try unpluging the wires to the coil and cleaning/spraing them and do the same to the computer
If the coil in the air handler is 2.5 tons, yes. The system is mismatched and you may also experience compressor failures due to liquid refrigerant flooding back to the compressor due to the undersized evaporator coil.
I would call local shop in your area for prices.
The compressor willl shut off due to high head pressure, the condensor coil is probably dirty. You will need to get a coil cleaning solution and mix to manufacture recomendation, spray the coil with solution and clean with water after the manufacture recomendation.
Prices for a new coil binding machine vary by manufacturer and the company/site selling them. Typically, the price ranges from as low as $120 to as much as $600 for the highest quality.
Coil springs typically last up to twenty five years. In fact, they are known to outlive the life of an average car.
one of your coil housing breaking down or spark plug want cleaning or changeing
POSSIBLE CAUSES AND SOLUTION: 1. IF MORE THAN 5 YEARS SERVING YOU COMFORT -- ITS TIME TO RECHARGE FREON GAS. 2. THERMOSTAT IS DEFECTIVE 3. BELOW 23 DEGRESS CELSIUS (74 DEGREE FAHRENHEIT) CANNOT BE ATTAINED IF REGULAR TOTAL COIL CLEANING (QUARTERLY) AND FILTER REPLACEMENT (SEMI-ANNUAL) OR CLEANING (WEEKLY) IS NOT PRACTISED. 4. AFTER THOROUGH CLEANING IF COILS FOR BOTH CONDENSER AND EVAPORATOR SIDE --- USE COIL COMB OR ANY FLAT SHAPED PLASTIC TO ARRANGE COIL IN STRAIGHT AND PARALLEL TO EACH OTHER TO HAVE MAXIMUM AIR EXCHANGE AND FLOW.