Plumbing drain vents equalize the pressure in drain piping in order to preserve trap seals on plumbing fixtures. Blocked or improperly sized vents can cause traps to dry allowing sewer gases to enter the building.
You should use a plumbing snake to clear a clog.
WHICH VENT If you're talking plumbing roof vents or soffit or ridge attic air vents; absolutely not!! I can't thing of a single vent that would be opened and closed at will.
3 feet
Check for the drain hose or pipe in your unit so that it is not clogged. Through the ac process water is collected and thus needs to come out. If the drain is clogged water will be trapped and the blower will pick it up and send it through the vents.
It has to drain the condensate buildup somewhere... Some drain directly into the homes plumbing and only drain outside the home when the inside line has plugged up, like an overflow pipe.
Hanzel Plumbing & Drain Cleaning
Mike Plumbing & Drain Service
Plumbing Repair Sink Drain Houston TX
HY-Pro Plumbing & Drain Cleaning Of Guelph
One that vents one fixture
Plumbing top-out is the stage of plumbing that occurs when a home is in its frame stage. There are three stages of plumbing typically in construction. Plumbing rough (prior to the foundation being poured); plumbing topout (bringing ground plumbing up through the vents); plumbing trim (installing fixtures).
Yes
346-291-7058
If the drain is adequate size, 3inch, then you could.
(346) 298-2769
If the dishwasher is hooked into a garburetor, there is a plug in the garburetor where the hose drain attaches that needs to be knocked out. The drain hose might be plugged where it joins to the plumbing drainage. The other problem, plumbing-wise, is the drain hose has to be fed as high as it can go under the sink and back down into the drain.
No it should be an indirect waste properly vented and trapped