answersLogoWhite

0


Best Answer

Scrubbers use a wet limestone slurry to absorb sulfur as it passes though. Filters are large cloth bags that catch particles as they go through the cloth. Scrubbers are more common, and can reduce sulfur emissions by up to 90 percent, when working properly. Still, smaller particulates are less likely to be absorbed by the limestone, and can pass out the smokestack into the air.

yehhh the answerr

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

15y ago

Scrubbers use a wet limestone slurry to absorb sulfur as it passes through. Filters are large cloth bags that catch particles as they go through the cloth. Scrubbers are more common, and can reduce sulfur emissions by up to 90 percent, when working properly. Still, smaller particulates are less likely to be absorbed by the limestone, and can pass out the smokestack into the air.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

Scrubbers in smokestacks help to reduce pollution by combining calcium oxide, which is an aqueous solution, with the sulfur dioxide from the coal. This produces a slurry (semi-liquid material) of calcium sulfite which is washed down to the bottom of the scrubber where it is removed. Carbon from the coal combines with the left over oxygen to form carbon dioxide which is released into the atmosphere. As you can see, scrubbers do stop sulfur from polluting the atmosphere but do not solve all environmental problems since carbon dioxide is still released.

This answer is:
User Avatar

User Avatar

Wiki User

8y ago

a scrubber cools it down

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What are scrubbers in smokestacks?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about General Science

What do floor scrubbers clean off the floor?

Floor scrubbers, particularly automatic ones, are usually not designed for general consumer use. They mainly clean light debris, dust, oil and grease off floors.


How do carpet scrubbers work to clean your carpet?

Carpet scrubbers work to clean a carpet by using cleaning agents designed to remove dirt from carpet fibers. The combination of the cleaning chemicals and the friction created by a scrubbing took get most of the dirt out of most carpets most of the time.


What is a floor scrubber?

A floor scrubber is a tool used to scrub the floor. There are many different types of floor scrubbers depending the they type of floors needing scrubbing.


How to Choose a Good Floor Scrubber?

We have all been in a public building at one time or another and seen a janitor slowly go past us lugging or pushing something that somewhat resembles the design of a push lawn mower. When they are done we notice that the floor is now sparkling clean. This is a floor scrubber. They have been around for quite a while now, and many designs have been created enabling it to now also come in household models as well. A floor scrubber basically is just a contraption that carries a reserve for water and soap that is going to be used to clean the floor. The water and the soap make their way to the floor via a couple of strong jets directed at angles to hit and lift dirt at the same time. At the bottom of the scrubber are rotating brushes that make for scrubbing the surface. The floor scrubber greatly reduces the amount of work and time that one has to use to get a floor cleaned and is a very worthy investment. So how does one go about choosing one of these floor scrubbers? %C2%B7 Size – How big or small should the floor scrubber be? This is basically determined by the total surface area that one wants to be cleaning. A floor scrubber intended for a public office will definitely not be the same as that for your kitchen. The larger the surface area the larger the scrubber. %C2%B7 Effectiveness – Not all floor scrubbers have the same effectiveness. Some may have a better mechanized brush rotation, for example. You will also have to look at how clean the floor really is when you are done pushing the scrubber across. Some may require that you do it twice or thrice while others just once. Do not forget to put into consideration how much water or soap they leave behind when you are done. The high end scrubbers will leave the floor almost dry when you are done since they wipe and suck the water and soap as you go along. %C2%B7 Ease of use – Some scrubbers may be tiny but heavy, and others may be large but greatly mechanized to make for an easy operation.


How to Operate a Floor Scrubber?

Sometimes, you may wish to get a floor scrubber so that your floor winds up cleaner and dryer than it would have been by using the traditional mop and a bucket. Floor scrubbers come in all sorts of styles and sizes, and they can fully clean nearly any kind of floor. However, most models come with the same principle: They have water and cleaner solutions that spray onto any floor and scrub using a rotating brush, vacuuming up the remains into a tank. Hard tiles, such as ceramic, and linoleum can benefit the most from floor scrubbers. It is possible for homeowners to either rent or buy their own small sized models, and they will be about the size of a regular vacuum cleaner.Make sure to fully sweep dirt off of the floor. If you have too much dust or loose dirt sitting around on the floor and you use your scrubber on top of it, it might lodge the dirt between the tiles or wetly spread it across the floor.Fill the intake tank with water at a very warm temperature, ensuring there are a few inches of room left on the top. Take your concentrated cleaner and include it into the water. Do not put in the cleaner first, and try not to splash or shake it, because the purpose is to avoid suds.Position the floor scrubber so that it is at the wall that is the farthest away from the door. If your scrubber requires that you push it forward, face away from the corner and have the machine face the room. If your scrubber requires you to pull backwards, both you and the machine should face the corner.There will likely be about three different switches on your floor scrubber that are needed to be turned on. First, turn on the switch for the water pump, followed by the vacuum and then the scrubber. Move your model the way it is intended to be used, working in steady and slow rows, ensuring that you keep your eye on the outflow tank to see when it gets to be too filled and will need to have the water replaced.

Related questions

What air pollutant do scrubbers in smokestacks remove?

I'm pretty sure its either mercury, sulfur oxide, or nitrogen oxide but you should double check on those


What is missing from the skyline of Central American cities?

Smokestacks of industries.


What is a device used to remove some pollution before they are released by smokestacks?

Industries know employ multiple technologies to reduce gas and particulate emissions. A common device used to remove such is through the use of scrubbers in waste stacks.


How many smokestacks were there on the Titanic?

The Titanic had four smokestacks.


How do you use smokestacks in a sentence?

Puffs of dark smokes came billowing from the factory's smokestacks.


When was Scrubbers created?

Scrubbers was created on 1983-03-16.


What is the female version of the film scum called?

Scrubbers: http://en.wikipedia.org/wiki/Scrubbers


How do scrubbers work?

particulate scrubbers typically run the flue gas between metal plates charged with static electricitygas scrubbers bubble the flue gas through large water tankssulfur scrubbers use catalysts and water to make sulphuric acidetc.


What are the release dates for Pot Scrubbers - 2010 SUSPENDED?

Pot Scrubbers - 2010 SUSPENDED was released on: USA: 2010


What were the four poles on the Titanic called?

Smokestacks


What is another name for tall chimneys?

smokestacks


What is the purpose of scrubbers in factories?

Scrubbers help to cut back on the amount of pollution that a plant releases into the air. They usually target both solid particles and gases. Scrubbers can help to curb the effects of global warming.