Sometimes the car will stall, or you might have it where it is hard to start. My check engine light came on, and it is always best to change both sensors at same time, usually if one goes the other is going.
where are the camshaft position
where
The crankshaft position sensor on this aurora is on the front lower portion of the engine. On the 3.5l v6, there is 1 , on the 4.0l v8 there are 2.-- TechJK ----------------
cured my hard to start aurora by changing crankshaft position sensor and having sensor re-learned by tech with proper tools
I hear it is the crankshaft position sensor (CPS) on the car, we have an Aurora in the shop now with this problem.
Trouble code P0385 means: Crankshaft Position (CKP) Sensor B Circuit
It is located behind the starter. You'll need to remove the starter to replace it.
Possibly. That was the problem with my 2003 4.0.
My 1998 Aurora with 4.0L V8 and 130,000 miles on it averages 22.1 MPG. Mostly highway 22 miles each way to work and back 70-80 MPH.
I have Olds Intrigue 2000 3.5L. Needed to replace faulty crankshaft sensor.3.5L engine has two of them. If engine is hard to start cold or hot and engine light is OK.Very common problem for this engine in Aurora 3.5 and Intrigue 3.5 is crankshaft position sensor. Which is located above and behind starter. Starter must be removed first.------------------------------------------------------------------------------------------------------------AnswerLower right hand side of the engine just above the oil pan. Theres a single bolt that holds it in.
Aurora 3.5 - the sensor is on the front of the engine, on the right side, up behind the starter. You can see it from the bottom looking up, but you have to remove the starter to get it out. The Aurora 3.5 has a single dual sensor. The Aurora 4.0 has two separate sensors.
Because it's an oldsmoble and Delphi made the parts that are installed on your car. It's something that we've all come to terms with a long time ago. Enjoy your Chevy.