Be careful for the sharp niddle..
the all time time one don't run when using machinery always where goggles always look what you ae doing and where you are going always have a penical
its a car and a dog and a mouse
safety.
End point rule
blanking is an operation where the material is cutout by using a punch and die. The punch will be in the shape similar to that of the required blank. the cutout part is the part which is required and the left out material is the scrap. piercing is the opposite, the cutout part is the scrap and left out part is the final part.
Be careful for the sharp niddle..
Follow all manufacturer rules and firearms safety rules.
dont fall off
more than a million
Wear safety goggles, gloves and an apron in a place with adequate ventilation.
Be careful and don't touch the thin file
were safety glasses and drop the slide
to prevent accidents that came from electricity.like fire
when using a craft knife always slide the blade back in
Check that there are no nails or screws in the wood you are going to cut.
1.do not eat clay 2.do not eat or drink near clay
Most workplace accidents occur when personnel take short-cuts with health and safety rules. They are not concentrating while using machinery, or using machines with the safety guards removed.