Ilo HD32 code is 11630
Others are:
11286
11684
11990
There are more than one Vivo TV Universal remote codes for a plasma 46-inch TV. You can find a full list on the Remote Code List website.
0150 for 32 inch or 1224 for 27 inch Try these
I also have a Toshiba TV...the codes listed in the flyer supplied are... 013 049 098 105 109 117 118 120 159 178 109 was the correct one for my specific model of Toshiba TV
i need to know to no remote
This is a universal mount that can accommodate up to a 63 inch screen.
Press and hold auto button for 4 sec. This will search remote for codes accepted by your tv. YUou may have to try many times since there are 100's of codes for that type of tv. Not everything will work.
Here is a free site where you may check out remote control manuals. I have the exact same remote as you do. Here is the link: www.manualowl.com I hope this helps. This should solve problems and may come in handy for other devices as well.
$5 to $10
It can hold up to 40 inch tvs.
I have provided instructions for a power scan to locate a code for your Scepter TV. We don't have codes for this TV brand.Remote: Basic Remote (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Press and release the red TV Power button.Press and release the Up or Down Arrow on the remote until the television turns off.After the television turns off, press and release the OK button.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.I used the sony codes listed under the tech support page in the dish home menu. I have the dish 301 system and the 42 inch sceptre tv. The code that worked for me was 578.
There are not currently any codes for that model of TV available. I would recommend using the power scan function to try and scan the code into the remote. I have listed the steps below for you! 1.) With the TV on, press and hold the TV button (about six seconds) on top of the remote until all mode button backlights come on, then release. 2.) Press and release the red power button, then press the Up arrow button once a second while pointing the remote at the TV. If the code for the TV comes up, it will power off. 3.) When the power turns off, press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.
The Hannspree 10-Inch MLB White Sox LCD Television comes with a remote control, it does not have a dvd player built in but it has an A/V input that will allow you to hook one up.