A good average is 3000 Watts
Both of these figures along with the voltage should be on the nameplate of the appliance or in the spec. sheet in the manual that came with the appliance. All appliances are a little different and without knowing the names and models it is hard to give a generic figure. Usually a washer uses a 15 amp circuit and a dryer uses a 30 amp 2 pole circuit.
Around 300.
Amps = Watts / (Volts x Power Factor). Now a hair dryer has a motor and a resistive heater so if we assume a PF = .8 the answer is: 1500 / 20 = 75 amps. Since it is unlikely that you have a 75 amp hair dryer you must mean 125 volts. The answer for that would be 1500 / 100 = 15 amps which is still high, but believable. If we assume a Power Factor of 1 and ignore the motor contribution to Power Factor we have 1500 / 125 = 12 amps.
To convert amps into watts a voltage is needed. Watts = Amps x Volts.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
11 amps Volts X Amps = Watts so if your dryer is plugged into a 120V circuit (common in U.S.) you would divide: 1875 Watts / 120 Volts = 15.6 Amps
The voltage would be the same even if you installed three washing machines. The amp draw is what will change. An automatic washer uses about 120 volts at about 700 watts, so your washer would draw a little less than six amps. It is recommended that it have a dedicated 20 amp circuit. If you install a dryer then the voltage requirement would be about 240.Rate
4800 watts because watts = volts x amps.
Watts equals volts multiplied by amps. This would therefore be a five amp circuit.
Yes, there are many "green" dryers on the market and some are better than others depending on how good the technology is. It depends on several factors: dry time, watts, and amps. Here's a list of hand dryers from "greenest" descending as per the manufacturer specs and a 120 V model: Mitsubishi Jet Towel (lowest settings): 12 seconds, 450 watts, 9.8 amps American Dryer eXt: 12 seconds, 540 watts, 4.5 amps Mitsubishi Jet Towel (highest settings): 10 seconds, 1060 watts, 9.8 amps American Dryer gXt: 10 seconds, 1500 watts, 12.5 amps Dyson Airblade: 10 seconds, 1400 watts, 12 amps Xlerator: 10 seconds, 1500 watts, 12.5 amps I guess you could also look at how many watts it takes to dry a pair of hands in 10 seconds as well, but it looks like Mitsubishi and American Dryer make the greenest hand dryers.
Amps = Watts / (Volts x Power Factor). Now a hair dryer has a motor and a resistive heater so if we assume a PF = .8 the answer is: 1500 / 20 = 75 amps. Since it is unlikely that you have a 75 amp hair dryer you must mean 125 volts. The answer for that would be 1500 / 100 = 15 amps which is still high, but believable. If we assume a Power Factor of 1 and ignore the motor contribution to Power Factor we have 1500 / 125 = 12 amps.
Amps are units of current, watts are units of power. Watts are the product of Amps times Volts. Watts = Amps x Volts.
Instead of the washer and dryer being side by side, the dryer is stacked on top of the washer.
To convert amps into watts a voltage is needed. Watts = Amps x Volts.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
11 amps Volts X Amps = Watts so if your dryer is plugged into a 120V circuit (common in U.S.) you would divide: 1875 Watts / 120 Volts = 15.6 Amps
form_title= Washers and Dryers form_header= Wash your clothes at home when you install a washer and dryer! Do you want to install a high efficiency washer?*= () Yes () No () Not Sure What are the dimensions of your space?*= _ [50] Do you want the washer to be front load?*= () Yes () No () Not Sure What features do you want in your dryer?*= _ [100]
Amps = Watts/Volts, or Amps = Sq Root of Watts/Resistance.
Watts are the product of amps x volts.