download the codes and the manual for free here http://www.replacementremotes.com/store/productdetailp.cfm?productid=61355.
Go to: http://www.lexrixa.com/remote-control.htm T…his List the codes and the Manual at no charge. (MORE)
You don't need them. Just follow these instructions: 1. Mmanually turn on the device (TV, DVD, etc.) 2. Press and hold the CODE SEARCH button until the red indicator stays… on, then release the CODE SEARCH button. 3. Press and quiclkly release the desired mode button 9TV, DVD, etc.). The red indicator blinks off once. 4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device (TV, DVD, etc.) changes channel. The red indicator blinks once with each button press. If you accidentally overshoot the code required, use the CHANNEL DOWN button to backtrack through the library until the device again changes channel. Pressing the CHANNEL UP changes direction to forward again. 5. Press and release the MUTE button to install the code. for a DVD on the name of oritron i lost the code book. Unless, of course, your DVD player is like mine and has no channels to change. (MORE)
I just bought the Philips CL034 universal replacement remote and was looking for the manual online so I didn't have to save the paper copy. Nowhere on this code sheet does …it mention the model number of the remote. However, I found it by searching for strings that were on the paper copy that came with the remote. (MORE)
Hi, I needed the same thing and I found it on the following website: http://www.urc.philips.com/ You will have to select your Phillips remote model type (through a few steps),… then select your device, then the specific model, but ultimately, you will get a list of codes to sync your remote to your device (mine was to a Magnavox TV). Best wishes from Seabrook, TX, home of the Hurricane Ike survivors! OK all you have to do for any remote is press and hold the setup button red light stays on. Press the function button of what you want to program. Press the channel up button until you have changed the channel then hit the OK or enter button. BAM your done no codes needed. (MORE)
ok very easy way to do this... you can go to the Phillips website and get the codes... here is the direct link that will take you directly to where you can find the codes. htt…p://www.p4c.Philips.com/cgi-bin/dcbint/cpindex.pl?ctn=SRU3007/27&scy=US&slg=en# (MORE)
I want to tell you what just worked for me....
1. Turn the component on that you want to program.
2. Press and hold that component key (TV, VCR/DVD, or SAT/CBL) on your remo…te.
3.Press ON/OFF button until your unit turns off..
4. Press Stop button to program the "code" that you remote found to work your component. (MORE)
First some background, some remotes use a 5 digit code, some use a 4 digit code. This is because some remotes automatically put in the first 1, some don't. So you may have to …try these codes twice, once with all 5 numbers, once with only the last 4 numbers. The codes I have listed for HP are:.
11088, 11089, 11101, 11494, 11502, 11642 (MORE)
You need to have a Code search button or at least have a list of codes. You can call the manufacturer for a list or a book. Look for a phone number and you will be able to get… some help with this problem. (MORE)