Want this question answered?
Here are the codes for your Dynex TV: 720 and 727Here is the instructions for programming the remote to your Dynex TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Hope this helps anyone like myself that was trying to set the remote codes on a Yamaha Receiver remote for a Dynex TV. I have a 32" Dynex in a second viewing area that I wanted to control with the RAV367 remote from my Yamaha RX-V1800 AV Receiver. I went through dozens of codes gathered from numerous websites, all with no luck. I finally decided to try programing it directly remote to remote with Yamaha's "Programing codes from other remote controls" chapter on page 104 of the RX-V1800's owner's manual. To my delight it worked perfectly and I now have most of the remote commands I use most often. The only alteration I made was to use the "TV Mute" control button on the RAV367 to set the TV input from the Dynex remote while using the "TV Input" button on the RAV367 to control the HDMI input. Other than that slight alteration every function I normally used on the Dynex remote I can now control with the Yamaha remote. I hope this helps.
We have 2 codes for your Dynex TV: 720 and 727. I have provided instructions on how to program the remote to your TV.Remotes: Basic (Television Only) Turn the Television On.Press and hold the clear TV button (on the DISH remote) for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Another code you can use for your Dynex TV is 727. I have provided instructions on how to program your remote to your TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.720 just worked for me, 42" LCD096 worked for my Dynex and the other website said that it generally works with most store brand tvs.
We do not currently have any remote codes in our data base for a Nexus TV, you should also be able to locate remote codes in the owner's manual that came with the TV.
Here are the codes for the Dynex TV: 720 and 727I have also provided instructions on how to program the remote to your TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
There are 4 codes available for an Element TV. They are listed below! Codes: 627, 251, 654, 659
The codes are 011, 020, 025, 027, 037, 052, 053, 059, or 060.
Every remote manufacturer has a different set of codes numbers for other manufacturers. What remote are you using?
01/26/2008: I just purchased an Insignia LCDTV. Using the scan feature of the Dish Network remote, I found a suitable code of 834. The code that worked for me was 720. -Just to provide a few additional codes besides 720 just in case that one is unsuccessful (it shouldn't be since this has the highest success percentage) but a few other codes that can be tried are 566, 538, & 505.
I just bought Curtis ledvd1975A TV/DVD combo. I have tried every RCA, SONY, Sylvania code as suggested by other message boards in the Comcast site. I have the Xfinity remote. Any ideas for other codes to use?
You can find Philip universal remote codes either on the Philips site or the site for the universal remote. Also some cable/satalite providers carry remote codes for the different devices.