Want this question answered?
What are the torque specs for 99 ford ranger 3.0L intake manifold?
The 1999 Pontiac cylinder head gasket bolt torque specification is 160 pounds. The intake manifold bolt torque specification is 90 pounds.
The 1999 Mercury Milliliter intake bolt torque specifications is 60 pounds per square inch. The intake bolts should be torqued at 30 pound intervals.
"Roadwheel bolts....110Nm 81 lbf ft" per Haynes VOLVO S70, V70 &C70 1996 to 1999 Repair manual
The head bolt torque specs for a 1999 Yamaha RT 100 is 16 foot pounds. Specs can be found in Yamaha repair books.
i'm looking for the torque specs on the rocker arms on a 1999 ford ranger 3.0 v6 the torque is 18-26 lbs
For the upper intake manifold bolt on a 1999 Pontiac Grand Am, apply 25 N·m 18 lb. ft toque. It is best to have a reputable repair manual on hand to double check your specs.
torque for bolts upper intake 1999 ford taurus 3.0 dohc
I FOUND THIS AT WWW.AUTOZONE.COM, CLICK ON VEHICLE SPECS . For your 1999 CHEVROLET TRUCK BLAZER 2WD: INTAKE BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE LOWER MANIFOLD BOLTS TO 27 IN/LBS TORQUE LOWER BOLTS TO 9 FT/LBS TORQUE LOWER BOLTS TO 11 FT/LBS TORQUE UPPER MANIFOLD BOLTS TO 44 IN/LBS TORQUE UPPER MANIFOLD BOLTS TO 7 FT/LBS (TO TORQUE BOLTS & NUTS, START IN CENTER USING CRISSCROSS PATTERN)
The front axle torque specs of a 1999 Saturn is 41 ft lbs. It is the axle shaft support bracket to engine bolts.?æ
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
Carefully tighten the bolts in a crisscross pattern to 45 inch pounds. Then re-tighten them to 83 inch pounds.