brought a rca remote tryin to use on a magnsonic tv
Here are some Samsung TV remote codes. 009, 0060, 0702, 0030, 0178, 0812, 0019, 0056, 0587, 0556, these codes will work for all Samsung TV's.
There are many different versions of the Vizio TV so to program your one 4 all remote try the following codes, three digit remote codes; 502, 627, 004, 113, 505 or 011. Four digit remote codes; 1758, 0178,1756, 0128, 0117, 1017, 1078, 0030, 0056, 0205 or 1292. Five digit remote codes; 10178, 10117, 11756, 11758, 01377, 10885, 10864 or 10120.
Samsung code will work, 10812 on mine.
To program a Symphonic TV with an RCA RCR-612 universal remote, there are four codes which you can try. Those codes are 1033, 1038, 1046, and 1047. To try the codes, press and hold the TV button on the universal remote. After you enter the fourth digit, the power light will turn on. Once the light is on, release the TV key. If the power light turns off, you have the correct code and can now use the remote. If the light blinks, it isn't the right code and you need to repeat the procedure until you find the right code for your particular TV.
Remote code for 27in Pentus TV Plasma Screen Remote code for 27in Pentus TV Plasma Screen
Hi Dear, These are the codes fore sharp TV 011,,034,049,058,181,20,216,226
If your instructions aren't available, use the link to Thompson's instructions for the RCA remote.
Try running the universal remote programming codes until one works. There should be a sheet of codes that came with the remote. If that doesn't work than chances are that you may have other problems with the TV.
The code required for a Coby TV will vary depending on the TV itself and what remote you are programming. Some codes you can try when programming your remote are 505, 607, 625, and 633.
Your best bet is to go to the Quasar web site and look up the codes for your model and plug them into the remote. If that doesn't work, chances are the remote is not compatible with your set. But don't go running out to buy a new remote. Most of them have an auto-programming mode and can usually find most any piece of equipment it is aimed at. wjs1632
what are the codes for a 47LG50 remote control to program DVD,VCR,Comcast
There are hundreds of codes for the Newstar universal TV remote. The codes for the Alleron television is 051. The codes for Audiovox is 053. The codes for Bradford is 053. There are many websites that offer these codes.
Sky remote codes are codes made up of numbers that allow you to customize your remote so you can control the volume and change your channels on the TV.
What are the codes for jumbo remote
what are the codes for rca remote with element tv
Here are the codes for APEX TVs: 757, 744, 595, 118, 743, 618, or 005.Here are the instructions for programming the remote to you TV:Address Remote to TV/Other DevicesWhile at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light upEnter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light upPress the Pound (#) button - The mode button you are programming should flash three timesPress the large, red POWER button - The device should turn off
tevion 56295 remote looking for codes for amstrad sky+