Check Engine light is on. Engine OK when cold, but when reaches operating temperature it stalls at idle.
YA!
To replace the oxygen sensor on a Honda Odyssey, first unscrew the sensor. Then use a 22 mm socket or 7/8 inch wrench to replace the oxygen sensor.
Oxygen sensor is located at the exhuast Manifold.
The bank 1 sensor 1 oxygen sensor on a 2002 Honda Accord is located on the header. It is right next to the sensor circuit.
Honda oxygen sensor is usually positioned in the exhaust manifold downpipe before the catalytic converter of your Honda vehicle or in the middle of the two mentioned components. For more details: http://sites.google.com/site/hondarepairsite/home/2004-honda-oxygen-sensor
The 1993 oxygen sensor is the best sensor for a 1993 Honda Accord EX.
It is the oxygen sensor.
Depending on which sensor, IS it sensor 1 or 2
The oxygen sensor on a Honda Civic is replaced by disconnecting the wiring harness and removing the sensor using a socket wrench. Anti-seize paste is applied to the threads, a new sensor is torqued into place, and the wires reconnected.
Answer There are two o2 sensors, one on the intake manifold and the other on the catalytic converter.where is the oxygen sensor located on 99 Honda accord
When the oxygen sensor goes bad, the check engine light goes on.
In the exhaust manifolds & in the exhaust itself