65 ft./lbs. for the inner, 70 for the outer. If it's 2-bolt mains, 65 ft./lbs.
The main bearing torque specifications, for your Honda Civic 1.6 liter engine, is 160 pounds. The main bearing bolts should be torqued in 40 pound intervals.
The connecting rod torque specifications, on a C 12 Caterpillar diesel engine, is 70 pounds per square inch. The main bearing torque specifications is 150 pounds per square inch.
which bolts are you talking about? every different size bolt has a different torque spec.
what is the torque specifications of the main bearing cup pistion bearing cup and cylinder head bolt tighteness
To what torque should the rod and main bearings of a 1977 366 GMC truck engine be tightened? The rods have 3/8" bolts and it has 4 bolt mains with 1/2" bolts.
Specs for main bearings on a 2003 Chevy trailblazer with 4.2 engine .
Pull the oil pan off and count the bolts in the main caps, 2 bolt main engines only have 2 bolts holding the main caps to the engine block. 4 bolt main engines have 4 bolts holding the main caps on.MAIN CAPS IS WHAT HOLDS THE CRANKSHAFT IN THE ENGINE BLOCK.
The main bearing caps will have four ( 4 ) bolts instead of two ( 2 ) they will be side by side. A four bolt 350 engine is more common in the bigger truck series ?
The Caterpillar C15 diesel engine torque specifications for the rod bearings is 35 pounds. The main bearing torque specifications is 350 pounds.
There are torque specifications for every bolt in a Toyota Corolla 1.3 L engine. The head bolt torque specifications is 70 pounds.
If it's the factory engine, then it will be a 2-bolt main engine.
The Mitsubishi Grandis has quite a number of various specifications that are worth mentioning. Some of these are a 2378 cc engine capacity and a 4-speed transmission.