What are the torque specifications for the intake and rocker arms on a 1999 Chevy Malibu LS?

Around 30ft lbs.

40lbs per square inch

step--1----1997-89in lbs,------1998 and later----168in lbs,----step2---rotate an additional 30 degrees.

A lot of manufacturers use a torque setting, but not Chevy. With the motor running, go to zero lash, and then 1/2, to a full turn from there.

The best answer to this is to go to your local auto parts store, and buy a Haynes manual. It has step-by-step instructions with pictures that should make it fairly easy. To do this job properly, you...