What can you do to seize your engine?

Normally when an engine is "seized up" it is frozen to the point that the crankshaft will not turn in the bearings. This is caused by heat most times the car has been run low or out of oil. The parts...

Yes Seizing occurs when the piston ring or rod bearings fail to move because of lack of lubrication. That thin coat of oil that prevents metal to metal contact is VERY important. So short answer is...

Engine STOPS abruptly usually after hearing a series of "Raps"

This is usually accomplished by either forgetting to refil the crankcase after an oil change, or by running the engine out of oil by not routinely checking the oil level, and adding the appropriate...

it stops running motor wont crank or even move should have 0 compression to.