you might have a speaker blown out, that's whats happenend to me if u have a good car stereo the blown speaker will send a loop back signal once the stereo gets this signal it will shut down the other speakers to keep them from blowing out.
Has it always been like this or not? If it is, then it is not really a problem. It is how the stereo was installed. An stereo can be installed to be turned on whether the engine is on or off. If the stereo cannot be turned off at all, then you have a problem with your stereo.
It is important to know what is going on inside of a vehicle. The headlights dim when a stereo is turned on or turned up because power is being drawn away from the lights to the stereo.
He turned 20 on April 29th
You should be able to get a cable that has a 3.5mm jack at one end, and the red & white audio connectors at the other. Plug the 3.5mm end into the sound output jack on your computer, and the red & white connectors into the corresponding connectors on your stereo. Put the stereo into auxiliary mode and you're done.
In this process, a 2D image on a screen or paper is "rendered" or turned into a 3D image by the use of computer programs. It also produces effects to produce the final video output.
you must have a stereo, and someone in the household must have turned it on.
Many plants produce nectar which is turned into honey by bees.
There are quite a few relays and solenoids that are activated when an engine is turned on. Some of them make noise.
I am sure that you realize that all of the conditions on the rung containing the output instruction must be true for the output to come on. Let's assume that they are and the output is energized. If the program encounters another rung with the same output addressed, but the rung evaluates false, it is then turned off. I hope that you can see that the addressed bit could be turned on and then back off during the same scan. If there are multiple conditions to turn on a particular output bit, use branches on the rung, or write multiple rungs to turn on internal bits that can then be relayed to the rung containing the output device address. I hope that this helps!
I hate to admit I searched this topic before noticing the "hr" and "mn" buttons on the bottom right of the stereo console (1998 Pontiac grand prix...stereo with equalizer built in). just press the buttons to adjust the time (with the stereo turned off).
I was putting in a new stereo in my car and i was pushing with a screwdriver to pushing the wires throw i cause the lights interior not working and the clock keeps going back one oclock when turned off and car door bleeper and stereo not work at all You probably blew a fuse, check the fuses.
Installing Speakonia and registering it, you can type stuff up and export it as a .wav file. Or, you can download Audacity and install it. Make sure Stereo Mix is turned on or you have a "Line-In" cord. Set Audacity to record from Line In/Stereo Mix.