loosen the alternator and it will slide right off
Check 2carpros.com for a belt routing diagram.
Serpentine brote change
On the power-steering bracket, you'll see a bolt going into it vertically from about the 11 o'clock position. this bolt is very long, but you may not be able to tell. loosen this bolt and back the PS pulley bolt out a few turns and everything will go slack, allowing belt replacement.
he serpentine, or accessory belt.
A 1994 Jeep Wrangler needs approximately 6 quarts of oil for an oil change.
No, there was a body style change in 1997.
It may be the serpentine belt. Sometimes when you purchase an "on the cheap side" serpentine belt, it has a tendency of making noise even when the tension pulley has been change. Try purchasing a more expensive belt. The diamond back serpentine belt may be the best solution for this problem.
turn belt tensioner clockwise to loosen there is a special tool you can get as loaner tool
That's going to be on the drivers side, at the top of the rear wheel arch on the frame, just relieve pressure on the lines, loosen the clamps holding it in and fit the new one on.
there should be an automatic tentioner on the serp. if not look at the alt it will have slotted holes to loosen up
follow the instructions on the fan shroud
A 1994 Wrangler is fuel injected, not carbureted.
what is the diagram of a serpentine belt for a dodge shadow 1994