There are many categories of jewel movement, for example, 17 jewels, 21 jewels, or 25 jewels. The actual meaning of these numbers is just a representation on the number of rubies used within the mens watches
Tiny synthetic gem crystals are set between many of the gears, in order to reduce friction. These gems resist temperature better than metal, and hold lubricant much longer.
Originally, the natural rubies were used before a major switch to industrial-grade or synthetic rubies for cost efficiency reason. There are two important points about rubies that make them suitable to be used as bearings.
Firstly they are extremely hard (it can be as hard as diamonds) to withstand high frequency of abrasion and wearing. Secondly, its smooth surface is perfect for the various steel components in the watch to operate on with much reduced friction.
With the high load and high speed motions within watches, the two advantages of ruby clearly outweigh any possibility of using steel bushings.
You can actually hear the jewel movement working. The ticking noise of mechanical watches are actually made by two rubies banging into the steel teeth of the escape wheel. You should make sure to have your watch serviced every five years, as the toughness of the rubies can erode the steel if not properly looked after.
It is the Louis Watch Co. from the 1950s that was located on Fifth Ave in NY
watch jewl are made from cut up jewels
Jewels are typically attached around the frame of the watch, or ocassionally around the band. Such jewels can be cubic zirconia or actual gens such as diamons and opals.
A very large number, if you include decorative jewels.
The numbers of jewels that are referred to in watch movements all depends on the make and manufacture of the watch. Certain companies like Waltham used extra jewels in the mechanisms of their watches, and 19 was referred to as a 19 jewel movement.
In a watch, the jewels refer to bearings for the shafts of the various moving parts as well as the escapement. Jewels, as opposed to plain bushings, tend to be harder and lower friction and thus wear far less and also tend to make the watch run better. The 7 jewels is the minimum for a functional jeweled movement, this includes 2 jewels for the balance wheel pivots, and balance wheel pivot caps, one roller jewel and 2 pallet jewels (the roller and pallets are part of the escapement). Higher jewel counts have more of the wheels (gears) in jeweled bearings.
If you give me the number off of the movement not the case i might be able to tell you about what your watch is worth. I will also need the name of the watch you should be able to fine this on the face of the watch or the movement.
There's a good discussion of jewels in watches here: http://elginwatches.org/help/watch_jewels.html
Not necessarily. The jewels, often rubies, are intended to provide almost frictionless operation of moving parts. Their effectiveness depends on the quality of the jewels as well as the craftmanship with which the moving parts of the watch are manufactured and assembled.
The number of jewels in a watch refers to the number of individual gears it contains. Other than opening it and counting, you may be able to look up the number by the make and model of the particular watch.
what is 21 jewels//
do you have a picture of a rigi 17 jewels swiss incabloc pocket watch