glass cutter is when u cut glass using a glass cutter
A glass cutter and a steady hand.
glazier
anyone
to cut a glass tube you just need to rotate the glass against a glass cutter until the etch the cutter make meets the starting point. Then you tap gently against the inside of the tube along the etch the cutter made. In the late 70's and early 80's there were bottle cutters that did this so you could turn a normal glass bottle into a drinking glass.
No. Only metal.
FalseAnother AnswerTrue, in the sense that diamonds can mar glass. A glass-cutter uses a diamond-tipped tool to mark a cut line on glass, then applies pressure to either side of the cut line. This separates the glass where the cutter wants it cut.
According to a couple of websites: Yes, you can cut heat resistant glass - use a diamond glass cutter.
It is called a glass cutter. There are various types and styles depending on the type of glass you need to cut.
Yes, you need a circular glass cutter. It kind of looks like a compass.
I use a 'glass cutter' Which is like a pen with a small carbide wheel on the end. I use a steel ruler to place the cutter alongside, and run it down one side of the glass lightly scoring. Then I slip a broom handle under the scoreline and gently snap the glass.
Yes A laser cutter or water jet cutter will cut it without cracking it.