answersLogoWhite

0

What does it mean if a rifle scope is 4 x 32?

Updated: 9/28/2023
User Avatar

Im2coolmatt

Lvl 1
14y ago

Best Answer

32mm objective, 4 power magnification.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does it mean if a rifle scope is 4 x 32?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the value of a Savage scope 8UWA model 3240A 4 X 32 marked on the top of scope as Springfield 4 X scope?

32


What does rifle scope magnifications refer too?

How many times larger the image in the scope appears. A 4 power scope makes the image 4 times larger.


What do the rifle scope measurements mean?

Two numbers, such as 4x32, indicate the magnification (4 times) and the size of the front (objective) lens- 32 mm. A bigger lens is usually brighter. Three numbers, such as 6-24x42 or 6x24x42 will indicate a variable power scope- from 6 to 24 power, with a 42mm front lens.


What is a Pecar 4 to10 rifle scope worth?

100-500 USD.


How far is a sks Chinese assault rifle accurate with a 4 power scope?

About 400 meters


Pecar 4 -10 -45 rifle scope value?

50-100 USD or so


What is the value of a Ithica rifle made in Finland caliber 270 with a 4 x 32 scope lether slig a light pull triker with a solid wood stock with chekering.?

depends on condition and if it says "LSA 65" on it.


What is a Glenfield Marlin 30 30 cal model 36G serial AA 56983 with a 4 x 32 Arm sport scope worth?

175-300 dollars.depending on the overall condition of your rifle,and a good bore.


How to install a rifle scope?

Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's.


What is the value of a sears rifle 4 x 15 Japanese Model 53988?

Sorry, that seems to be a model umber for a basic .22 rifle SCOPE- value about $10


How do you use hunters rifle on left 4 dead?

If you click your scrolling button on your mouse, you scope. Shoot with the left click


How does a crosman 4 times 15 rifle scope looks on zero?

It looks like 4X larger than normal